Monday, November 28, 2011

Micro Mini USB Wireless B/N/G 802.11n RTL8192CU WiFi LAN Adapter Windows Vista/XP/7/MAC


Price : Too low to display
BUY NOW
Specification:

-100% brand new

-Standard: IEEE 802.11b/g/n

-Interface: USB 2.0 Interface
BPSK, QPSK, 16 QAM, 64 QAM modulation schemes

-WEP, TKIP, AES, WPA and WPA2 hardware encryption schemes


-System Requirement:


-PC-compatible computer CPU speed of 200MHz or above

-Memory: 64MB or above 128MB recommended

-Window XP/ Vista/ 7, Mac OS, Linux

This review is from : Micro Mini USB Wireless B/N/G 802.11n RTL8192CU WiFi LAN Adapter Windows Vista/XP/7/MAC
Great value for price but lackluster speed and reception . I bought this for a laptop with a broken wifi card. I did not want to buy one of the bigger wifi dongles because they tend to break and/or wear out the USB ports. Size-wise, this mini-dongle is barely noticeable. It is so small, you can plug it in and forget about it. Unfortunately, it can't beat the laws of physics and small size means also a small antenna and poor reception. There is a reason why many wifi-addon adapters come with huge antennas. This little thing does not get full signal strength even within 20ft of the router. As a result, even though this is advertised as a wireless-n card, you won't get wireless N speeds. The best I have seen was 54mbs, but oftentimes less as the adapter slows down when the signal weakens. That being said, you still can't go wrong for this price. Unless you have a huge home, this card should be adequate. Otherwise it works great. I ran streaming radio on it for hours without a single hiccup. Despite weak signal strength, the adapter has never actually dropped the signal. Unlike other mini-dongles, this one does not get very hot, just a little warm. Driver installation was a breeze. The card uses a standard Realtek chipset. Windows update detected the card right away and had a more current driver than supplied on the mini-CD.

Note that this adapter does NOT have a WPS button, even though the packaging advertises this feature.
Micro Mini USB Wireless B/N/G 802.11n RTL8192CU WiFi LAN Adapter Windows Vista/XP/7/MAC Reviews
Awesome price and functionality+++ . Received a laptop back from "warranty" with a faulty wireless card. I didn't want to deal with the wait again and decided to buy this unit. Compared it to Airlink and others on here and decided for the price I would give it a shot. The range is great. I grab my signal from a neighbors router which is about 30ft away and 4 thick walls in a pre-1940's built complex.

Very inconspicuous and sticks out maybe 1/2" from back of my laptop. Software was easy to locate and download on the mini-cd that is sent with the dongle(Win Vista). I did have a temporary dongle which I bought from Walmart at 4am when my stock unit broke and was doing research for a class and this one clearly has been better than the Cisco-Valet unit I purchased for around $40 on clearance(has since been returned).

This unit is more compact, which is less hassle than having a full size device like the Cisco hanging off my portable tablet PC. It is thus more flexible and the device management software is much better. typically 4 bars of strength at 20-30feet. Works as well on campus and does not dip below 3 bars at any given moment. Have owned unit approximately 2 weeks and decided to wait an ample amount of time to write a review and am very satisfied as should you.
Micro Mini USB Wireless B/N/G 802.11n RTL8192CU WiFi LAN Adapter Windows Vista/XP/7/MAC Opinions
Very small very nice . I had this item installed and working very quickly using the cd provided. I did a speed test at [...] and it ran very fast and smoothly. I then ran windows update and it located a newer driver, and installed that. I then tried to stream a bluray movie on my desktop over the wireless connection onto my laptop with this little card, and there was no hiccups or problems.Would recommend, and for the price, buy two!
Fyi, I am running windows 7 professional 32bit.
Good Wireless Adapter for 10 Bucks! . I needed a wireless adapter for a older laptop I have without one. I was looking for a small one that would not stick out of a back usb port on my laptop and this unit stuck out for under 10 dollars. Once I got it is was relatively easy to install the drivers. I just used the driver files themselves to install the unit because I don't like all of the crapy software these things come with that promise to control wireless connectivity. There is nothing wrong with using windows to configure your wireless networks. The connectivity speed was as posted and the transfer rate was a little better than that of a 100mb network interface card which was to be expected but the reception was a little shady. I live in an apartment where my wifi router is in my back bedroom and my patio is 3 walls away from the router but yet when I am on my patio I only get a quarter of normal reception (24mbps) which is probable due do not having an antenna.

This is a great wireless adapter as long as it is not being used for long distances.
Splendid! . A great little life-saver for an old laptop I have... Set-up was a breeze with XP, and I haven't had a problem. The software is a teeny bit annoying (it'll pop up and confuse the user of the laptop if I'm not around) and there are a few icons that clutter the windows notification bar. I could probably change some settings for that if I were more ambitious, though, so that's not really an issue.

All in all, I've had no problems!
Wireless N USB Micro Mini Adapter . This is a tiny & very light adapter. My package had no CAP or CD. Prior to receiving this adapter I downloaded the drivers from Realtek which made the installation & connection to the Internet seamless. I use Windows 7X64.The signal strength is very good at a close range...not so good at a distance. For a price of less than $7 this adapter is a great deal as long as the requirement is not a long distance.
Went against conventional thinking . I decided to take the chance even though I read about small adapters having limited range and I was happy I did. My DIY PC was upstairs and the router is downstairs. Signal strength was 4 out of 5 bars.This made me wonder if the router strength was more important than the receiver. I am using a dual band router from belkin purchased recently and I get at least 4 bars for the laptops in my house regardless of location.
Great little adapter . Was looking for a small adapter with a reasonable price tag, this little gem was the perfect solution. Easy setup was up and running in little or no time. Used within my home so I'm not sure how well it will work for more mobile devices but it is perfect for my needs...
great small cheap way to get WiFi . These are spectacular for how small they are. Great for using in a laptop that the Wifi has gone bad in or in a desktop without having to take it apart to install something or having USB wires hanging all over. The best part is how cheap they are. I have bought 5 of these so far (and used 4), all work well and have had no issues. It should be noted that though it comes with a driver disc, at least some of the drivers (I did not look through all of them) are within zip files. So you can't just pop the disc in and point windows to it for the drivers. You have to navigate to the correct driver folder and extract the driver files from the zip file to somewhere on your computer then point windows to that for driver instillation. Not annoying enough to drop the product a star, but could be frustrating for someone not paying attention to this. Overall... WELL worth the money and a great product (How is it THAT SMALL??)

Cons Review
Decent signal strength S L O W downloads ! . WIth old wireless G adapter on this desktop I got 8mb/sec download speeds.
In same location this Wireless N adapter gets me barely above 1 mb/sec,
and does that poorly. Using it for Netflix gets me blurry pix and
halts in mid-movie.
Would not recommend this unit, except to an enemy.
I ought to return it. In fact if I can find packaging, I will.

Product Image


Feature Micro Mini USB Wireless B/N/G 802.11n RTL8192CU WiFi LAN Adapter Windows Vista/XP/7/MAC

  • Ultra-mini sized
  • IEEE 802.11g/b/n compatible
  • Data transfer rate up to 150Mpbs
  • USB 2.0 and 1.1 compliant
  • Easy installation




Related Post

Product Details

EAN : 0013964255577
UPC : 013964255577
MPN : 020102-00010
Brand : gamesalor
Weight : 1 pounds
Height : 1 inches
Length : 6 inches
Width : 4 inches
Binding : Electronics
Manufacturer : GMYLE
Publisher : GMYLE
SKU : 30661-1
Studio : GMYLE

Where To Buy


You can buy Micro Mini USB Wireless B/N/G 802.11n RTL8192CU WiFi LAN Adapter Windows Vista/XP/7/MAC on Amazon . Click here to Read More

Buffalo Technology AirStation N150 Wireless Router & AP WCR-GN (White)


Price : Too low to display
BUY NOW
Buffalo's N-Technology Wireless N150 Router & Access Point WCR-GN is a compact, entry-level wired and wireless solution, combining Buffalo’s legendary wireless technology with an ultra-small, simple and hassle-free installation. Buffalo’s AirStation One-Touch Secure System (AOSS) and Wi-Fi Protected Setup (WPS) allow you to easily configure security settings and connect to the Internet in a matter of minutes. With speeds up to 150 Mbps, N-Technology provides performance and range superior to that of 802.11g wireless products. The N-Technology Wireless-N 150 Router & Access Point is a high value wireless router that is compact and easy to use.

This review is from : Buffalo Technology AirStation N150 Wireless Router & AP WCR-GN (White)
Better than powerline . I've been using a powerline adapter to get ethernet to my slingbox and other A/V equipment, but powerline is very sensitive to anything and everything. So I started looking for an affordable wireless bridge. Here it is in the WCR-GN.

To be clear (since the packaging is not) this unit can be used as a standard access point and firewall, or as a bridge to connect to your existing wireless network and give you five ethernet ports in a remote location--a wireless switch. The box leaves you wondering if this unit is compatible with other brands of access points--it is.

I got the unit, plugged it in and configured it for bridging mode, and it connected to my D-Link DIR-625 wireless network with no problems (using 802.11n). It brings me much better and consistent throughput to my A/V equipment than did my four port powerline unit. In bridging mode the "WAN" ethernet port becomes a fifth switch port.

The web management interface is quirky and unrefined, but it gets the job done. When you make changes that cause the unit to reset, the screen usually says it will take about 20s. It really takes 1-2 minutes to settle down and stabilize, so don't get too impatient. The radio seems to have a more limited range than most, but it's acceptable for my purposes. It is a rather small unit, so can fit just about anywhere.

This unit can also act as a simple access point with a no-frills firewall, but I don't intend to use it that way and haven't tested it. What I did test was streaming my slingbox to my desktop while simultaneously watching an HD YouTube video streaming to my BluRay player. Both were running through the Buffalo in opposite directions. Pretty basic stuff, but I had to make sure it performed given the price. Neither had a hiccup, which is again far better than my old setup.

Lastly, in bridging mode it can also act as a wireless repeater to extend your existing wireless signal, or to add more SSIDs. I don't have a need for this and only tested it briefly.
Buffalo Technology AirStation N150 Wireless Router & AP WCR-GN (White) Reviews
Loses wi-fi connection with Apple iPhone . It works fine when connecting a laptop or a Nintendo Wii but the Apple iPhone won't keep its wi-fi connection. I've noticed other reviewers have had the same problem.
Buffalo Technology AirStation N150 Wireless Router & AP WCR-GN (White) Opinions
Easy to set up . AP was easy to set up, easy to use. Being typical guy, I did it without reading the instructions. :-)... Switching from router to AP was one button choice, made it very easy to extend network. As AP it gets IP from DHCP server and was on the network in no time at all. Great for the price.
Gret little product . This is my 3rd router of this type that I am using as a local switch and AP. Works perfectly with my main Buffalo N300 router, though learning how to use these as a bridge took some digging. These are great also if you are on the road and happen to stay at places with wired but no wireless access.
works fine straightforward setup . This router works just fine for me. I see no reason why it wouldn't work for any normal home use, but the configuration interface does require a MODEST amount of tech know-how. If you've ever installed Windows for yourself you'll probably get through this just fine. The main thing is throw away the CD that comes with it, plug in via a cable and just point your browser at 192.168.11.1. Login as "root" with no password, and there's your configuration setup (obviously, set a password first thing). I didn't try the wizard/automatic thing, as the bare config UI is quite sufficient, and surprisingly flexible for such an inexpensive device. It took me less than 5 minutes to setup the wireless network with logging, WPA2 Personal, DHCP reservations and port forwarding -- piece of cake. Our home network these days includes computers running Linux, Mac OS X, and Windows 7, plus a TiVo, an Android phone, and a Blackberry. All are working flawlessly with this router.The one big "gotcha" I experienced and my only real complaint is it's only capable of using an 8 character root password. I'm sufficiently paranoid that I usually use passwords at least twice that long, so the first two times I set the password then couldn't log in and had to reset the thing before I thought about password length, and sure enough...

TLDR: for under $30 this router is a real steal. I just wish they'd upgrade the firmware to allow longer root passwords, or I'd have given 5 stars.
Complicated setup but packs a lot of functionality for the price . This device has loads of functionality in a very small footprint. But setting it up can be extremely frustrating!

I've been using it as a wireless bridge for a wired VOIP device for the past few weeks. My wifi network runs off a Linksys router, so I can confirm that the bridge mode does work with non-Buffalo routers. Here is how you set it up:
1. Power up the device with no LAN cables plugged in
2. If you already tried to set it up previously, reset the device first by holding the reset button until the Diag LED is lit. Release the reset button and wait till the Diag light goes off.
3. Connect [1] port of the device to Laptop (turn off wi-fi on the laptop first) using a LAN cable.
4. Open IE and go to 192.168.11.1 (try 192.168.11.100 if that doesn't work). Login with root/(blank password).
5. Click on switch operating mode to bridge. Wait for restart
6. Click on Wireless config. Click on WDS tab.
7. Click check-box to use WDS
8. Enter your existing network's SSID and click search. Enter key and click apply.
9. Unplug the LAN cable from your laptop, wait a few minutes, plug it back in. Try to access the internet.
10. If internet works on your laptop, you should be able to plug your media device to any port on this device for internet access

Pros and cons follow.

Pros:
1. Packs a lot of functionality in a very small size, while also looking good (though I usually prefer black to white)
2. Lowest priced wireless bridge I could find at the time of this writing

Cons:
1. Setup is terrible and the configuration UI is the worst I have seen bar none
2. Unreliable as a bridge for a VOIP (or other 'always on') application. I keep losing uplink momentarily about 10-15 minutes into a conversation and being forced to place the call again. It should work fine for applications such as video streaming or downloading where momentary loss of connectivity does not pose an issue.

In summary, I wouldn't recommend this device as a bridge for internet telephony or gaming. I think it should do fine for streaming audio/video and downloads.

For the price, this is an excellent value even just as a Wireless-N router. The bridge mode is an added bonus. Just be prepared to spend a few frustrating hours setting it up initially.
Excellent Value - If you are a Techie ! . The software that comes with this will challenge even the most advanced user. This is a long, long way from "Plug & Play" However once set up, it works very well with excellent range. Quite a value when comparing with similar units. I used it to add an "N" band to my home network & extend the previously weak signal to my separate workshop about 50 feet from my house. Went from one to two bars & dropping signal on my Actiontec GT724WGR to a steady 4-5 bars. Pleased as punch at the price.
Set-up is a beast but works great . To be clear, I consider myself extremely fluent with computers and setting up networks. This was by far the most confusing piece of equipment I've tried to set up. That is partly because I wanted to use this as a bridge and not as a router. The automated set-up utilities were useless. The online configuration screen is, of course, of its own design and not necessarily intuitive. I finally just followed the setup instructions for a manual setup and got it to work.

My application was using this to add a xerox copier/scanner to a wireless network. Once I got the router configured as a bridge, all I had to do was connect my copier to the router with a network cable, and it worked. For the price, this was a much better, more flexible option than running a wire or adding a port in the room would have been. I leave it on 24/7 and in the past month have had no issues with it at all. Hopefully it stays as a "set it and forget it" router.
Does the job well instructions are horrible. . The reason I purchased this product was because we were moving our entertainment center with all of our media to another wall where I wasn't going to be able to place the cable modem and my existing wireless router. Those stayed where they were. I also have media devices that were wired connections only. So, how was I going to connect these devices without extending CAT 6 cable all over the place? The Buffalo Technology N-Technology Wireless-N150 Router and Access Point WCR-GN (White) was the answer.

The device is very small and fit perfectly in a little space behind the TV where it was unseen and unobstrusive. Perfect. It synced with my existing network, has 4 ethernet plugs for my devices. Perfect. Has some level of encryption. Perfect.

However, it took me nearly and hour to configure the darn thing. Professionally, I'm an network engineer and this thing was so difficult to configure I almost threw it away. I can't imagine the difficulty someone might have who isn't familiar with the lingo. The software is not intuitive and extremely cumbersome. The nice thing is once it's up, I never have to touch it again. And it works like a charm.
Worth the money . Router functions well, Setup as bridge is somewhat difficult no clear documentation on setup.
I'm using it for Netfilx access with my samsung blue ray player. Connection speed is fast enough
for uninterupted access. Given the low price of this unit it is definetly worth the time you need
for setup.

Product Image


Feature Buffalo Technology AirStation N150 Wireless Router & AP WCR-GN (White)

  • Ultra compact size
  • Push-button setup with AirStation One-Touch Secure System
  • Wi-Fi certified for maximum compatibility
  • Supports QoS - WMM Wi-Fi Multimedia
  • Built in 4 port Ethernet switch




Related Post

Product Details

EAN : 0747464121567
UPC : 747464121567
MPN : WCR-GN
Brand : Buffalo Technology
Color : White
Weight : 1 pounds
Height : 3 inches
Length : 10 inches
Width : 9 inches
Binding : Personal Computers
Manufacturer : BUFFALO
Model : WCR-GN
Publisher : BUFFALO
SKU : 1017420547
Studio : BUFFALO

Where To Buy


You can buy Buffalo Technology AirStation N150 Wireless Router & AP WCR-GN (White) on Amazon . Click here to Read More

TRENDnet 4-Port VPN Firewall Router TW100-BRV204 (Blue)


Price : Too low to display
BUY NOW
TRENDnets TW100-BRV204 Cable/DSL VPN Firewall Router provides a remote workforce or branch office shared broadband internet access, while providing advanced Firewall and VPN security against potential hacker attacks. In addition to Network Address Translation (NAT), the router includes a robust Stateful Packet Inspection Firewall (SPI) to filter traffic at the packet level with protection against the popular Denial of Service (DoS) attacks. VPN encryption supports up to 10 VPN tunnels via client pc-to-endpoint or endpoint-to-endpoint configuration. The install wizard helps make installation and VPN set-up quick and easy. The new VPN Firewall family delivers advanced security for your sensitive information at an affordable price.

This review is from : TRENDnet 4-Port VPN Firewall Router TW100-BRV204 (Blue)
Does everything I hoped it would do . I replaced a $400 VPN router with this one. Working from home with the original router I had a permanent IPSec tunnel into our main office as well as a permanent PPTP tunnel into a second office. This router started having problems so I looked for a replacement. Although I could find a lot of VPN routers which would do IPSec tunnels I could not find one at a reasonable price that would do the PPTP tunnel so I went with the cheapest VPN router I could find. With the Trendnet router I still have the IPSec tunnel into the main office but I have to connect an individual PC to the second office with the PPTP connection meaning that is the only PC which can see that office's network. However, I knew I would have that limitation when I bought the Trendnet router. I have now been running for a month on this router without a hickup. I have been very surprised at how well it has worked.
TRENDnet 4-Port VPN Firewall Router TW100-BRV204 (Blue) Reviews
Good features but a little flaky . I bought this router after finally giving up on all things Linksys. So far, it has worked reliably and I love the PPTP remote access feature. (Be aware that this style of VPN is very insecure unless you use a strong password.)

The one objection is the configuration interface. Very unstable. I accidentally entered a PPTP key that was longer than allowed. No warning message, just some garbage on the screen and it never let me log in again. I had to do a hard reset and start all over, twice, before I realized what was happening. In fact, I'd like to tweak the configuration now, but it has locked me out and I'm just living with it as is, rather than starting over again for the third time.

If you get your configuration right, it works great. Compared to the junk Linksys is selling these days, it's a big improvement.
TRENDnet 4-Port VPN Firewall Router TW100-BRV204 (Blue) Opinions
should have bought this the first time! . Painless installation, 5 years warranty, threw my linksys in the trash due to network dropouts about 2 months after the warranty expired. I'll never go back to linksys. GREAT JOB Trendnet!

Cons Review
Don't buy this product . MS built-in VPN server crashes all the time in spite of updating to the latest firmware. I also experienced a huge lag time on using my remote access connections through this router.
slow tech support . The VPN functionality does not work as advertised. I attempted PPTP but was not able to access LAN. Wasted many hours trying to get the problem resolved. Opened a case with Trendnet but they called me back in 4 days instead of the 2 days they promised. Once they do reply, they're not bad. One of the few companies that are still using onshore tech support (at least for the VPN part). The product guide is sketchy and does not contain problem solving help for this particular problem. The website has some FAQs but also does not address this problem. I managed to get the remote desktop to work. Still working with tech support on accessing the LAN. I nearly gave up on them. Let's see if they can get my problem resolved. They had me upgrade the firmware to version 2.


Feature TRENDnet 4-Port VPN Firewall Router TW100-BRV204 (Blue)

  • Standards: IEEE 802.3 (10-Base T); 802.3u (100-Base TX)
  • Protocols: NAT, PPPoE, NTP, SMTP, HTTP, TFTP, DHCP, TCP/IP, PAP, CHAP, RIP1, RIP2, DDNS
  • WAN: 1 x 10/100Mbps Port (Internet)
  • DMZ: 1 x 10/100Mbps Auto-MDIX Port
  • LAN: 3 x 10/100Mbps Auto-MDIX Ports




Related Post

Product Details

EAN : 0769118103712
UPC : 710931301168
MPN : 0710931301168
Brand : TRENDnet
Weight : 3 pounds
Height : 3 inches
Length : 10 inches
Width : 8 inches
Binding : Personal Computers
Format : CD
Hardware Platform : Pc
Manufacturer : TRENDnet
Model : TW100-BRV204
Operating System : Windows
Platform : Windows
Publisher : TRENDnet
SKU : TW100BRV204
Studio : TRENDnet

Where To Buy


You can buy TRENDnet 4-Port VPN Firewall Router TW100-BRV204 (Blue) on Amazon . Click here to Read More

NETGEAR WG302 ProSafe 802.11g Wireless Access Point


Price : Too low to display
BUY NOW
MODEL- WG302NA VENDOR- NETGEAR INC. FEATURES- ProSafe 802.11g Wireless Access Point Intelligent Networking Features for a Scalable Secure Solution. NETGEAR's ProSafe 802.11g Wireless Access Point sets the standard for next-generation high performance secure manageable reliable wireless local area networks (WLANs). This powerful device provides the ultimate in continuous industry-standard 54 Mbps access to corporate network resources e-mail and the Internet for a wireless workforce. Fully compatible with IEEE 802.11g (2.4 GHz) it also can be set for dynamic 108 Mbps 802.11g.** In addition it is backward compatible to preserve your 802.11b-based investments providing a migration path to higher performance networking. Wireless Distribution System (WDS) supplies wireless point-to-point bridging point-to- multipoint bridging and repeater functionality for deployment over large areas. Advanced security features include up to 152-bit Wireless Encryption Protocol (WEP) data encryption Wi-Fi Protected Access (WPA)*** 802.1x and Virtual Private Network (VPN) pass-through support and Medium Access Control (MAC) address filtering. NETGEAR ProSafe Wireless Access Point is rated for plenum air spaces. ** Static 108 Mbps 802.11g available now. Dynamic version available via future firmware update. In order to achieve 108 Mbps requires client adapter that supports the same mode. NETGEAR's WAG311 PCI Card WAG511 PC Card and WG511T PC Card all support 108 Mbps 802. *** Future firmware upgrade. Includes Wireless Access Point Two (2) 5 dBi Detachable Antennas Resource CD Power adapter 3 m (10-ft) Ethernet cable Wall Mounting Kit Installation guide Warranty/suppo

This review is from : NETGEAR WG302 ProSafe 802.11g Wireless Access Point
They work well for me . I have six of these installed in my main office and three outdoors to connect several buildings. I'm not sure why the other reviews are so negative. On the indoor six units I'm running RADIUS authentication on a Windows 2003 network and it works flawlessly. I've had to adjust the power output for each unit so they don't over-reach. Users can roam the building and stay connected with no problems. The outdoor units are running in AP/Bridge mode and have been trouble-free. I'm not convinced the external 9db antenna really adds much more range. Be sure you're using the latest firmware which resolves a DHCP error.
NETGEAR WG302 ProSafe 802.11g Wireless Access Point Reviews
Needs a repeater to work well . I bought this access point to provide wireless coverage to a 2 story colonial house. Even with a Netgear ANT24D18 Ant 18DBI Patch Panel attached, it provided less coverage than what I was using before, a Netgear WPN802 v1.
What I am using now is this WG302 w/ ANT24D18 patch panel as the access point, and the WPN802 as a repeater. This is working well.
NETGEAR WG302 ProSafe 802.11g Wireless Access Point Opinions
Long time WG302 user . Three years and running. The wg302 is excellent. Of, course early on, I had to wait for bug fixes and enhancements via updates to the firmware. But overall this item is excellent. I cannot understand the low ratings of others. I wonder if you just have network configuration issues. Some knowledge is required to configure a WAP within a network. You must understand a little about radio and interference too! Using 802.11g near other 2.4Ghz radios is very tricky. Even a microwave can cause performance issues.

BTW, I'm not moving to 802.11n till NetGear has stabilized the firmware. I won't need to run in dual mode because I can leave the wg302 in place to cover the legacy wireless gear.
Good reliable sturdy wireless option. . 2011 EDIT: This unit's SSL certificate has expired and is no longer accessible via the web interface! I have read up on it, and apparently the way to correct it is to make sure the unit does NOT find the correct time. Leave it in 2006. Netgear of course offers ZERO support for this problem. If you can't access your unit, you will have to reset it to the default settings by holding the reset button for 5 seconds. Then you can access the interface and make sure it doesn't have access to DNS or default gateway. Leave them blank. Of course your time will be off, but at least you'll be able to access the AP. There is a version of DD-WRT, but unfortunately they think only businesses uses this Access Point so they charge for it. I've lowered my rating of this unit because Netgear clearly doesn't expect their equipment to last 5 years even though they are still selling these as new, and because they didn't offer any firmware update to correct the problem.

Not quite sure why the other reviewers had so many issues. I have no formal training in wireless networks and had no real problems with the access points themselves. Maybe because I didn't use WPA. I used two of these AP's to bridge two apartment buildings and several apartments connecting a total of somewhere around 16 PC's. The only issue I had was one of the power supplies was bad on arrival.
These units have removable antennas so you can add larger antennas or even amplifiers.
I used one of these AP's with the Netgear ANT24D18 which even though I got a good deal was a slightly expensive option. The other I used with a much cheaper (live and learn) rooftop antenna that looks more like a microwave antenna. I attached the Netgear antenna to the access point on a balcony of the apartment building across the street. Total distance between the antennas was probably only 300 feet.
Once I aligned the signal of the two antennas, the signal quality was outstanding. Both AP's connected at turbo '108 mbps' speed. I was able to easily watch a streaming video from one computer in one building to a computer in the other. We also played LAN video games between buildings with no issues.
Because of the remote outdoor locations of one of the AP's (in a waterproof box but still exposed to extreme temperatures and humidity) and a shortage of expensive antenna wire, I ran the power over two of the unused ethernet wires and still had zero issues and rarely lost packets. The only issue I had was during severe windstorms that would misalign the antennas which would lower signal quality and strength. Oh, also the connection between the two AP's was WEP encrypted 152 bit. I also had another AP (DLink) running at the same time and had no interference issues. The Dlink however has it's own set of issues, big surprise though. Quality-wise Netgear has always been above DLink and Linksys for me. A Linksys AP I use at work can barely transmit through one wall without dropping signal like crazy.
The only other bad thing I can say is that in a very, very quiet room, sometimes you can hear a tiny buzz from the AP.
Used as a wireless bridge out to my detached garage. . I use this router as a wireless bridge out to my detached garage. Loaded Tomato on it and it has great range and speed. I used it in the garage as a link for my High Res security camera worked perfectly. I would recommend to anyone to change the default firmware with Tomato, easy to setup and fast with lots of features.
Best - Longest Wireless . I am a computer tech by profession. I have and will continue to use the Netgears with 2 5db antennas for as long as they are made. They reach further than any other brand when distance is needed.

Cons Review
Poor setup terrible support good range . I purchased 3 of these APs with the expectation to replace 3 Cisco "b" APs and drop in. The setup used Radius for authentication which is claimed to be supported in both the online info and docs. After config (the web UI constantly has problems with cookies and forced you to re-login) the system would work. One quark was the IP address field for the radius server wouldn't accept more than one character in the forms. Up and running. However, upon reboot, the WG302 loses it Radius info and then cannot authenticate a client again. SHOWSTOPPER. After logging this with Netgear support - their response is this is an unsupported config and requires premium support. While this would be fine if it was a config issue, it's not ok given they claim support for these features and this was a required feature for purchase. They give no further support now.

I would HIGHLY recommend against the extra cost of this unit given it's buggy and has poor support. Config is difficult (I had to learn how to use the command line config), the upgrades are not well documented (they imply you have to import some obscure file with tftp - you don't but...), however the unit does have good range and works (No RADIUS of course) in a basic config.
Warning - Unstable Product . I bought two of these for my church. I struggled with these products for 4 months before finally convincing the VAR to let me return them. There are severe bugs in the firmware and possibly the hardware. I went through 4 RMAs with Netgear before giving up on the product. Technical support was great but engineering just couldn't come through with a fix. Look at the forums before purchasing to make sure that the issues have been addressed.
Not worth it . Just about the only thing good about this unit is how easy it is to setup.

This AP is not worth paying extra for. I have personally demoted this "business class" AP to home use...which sadly doesn't even perform well in such conditions where multiple wireless stations are present in the environment (as with all multi-dwelling unit/condos)...even when it is literally less than 20 ft away. Contant constant connect/disconnects make it extremely unreliable.

The "auto-cell" feature, which was a major reason for purchase, is deprecated. New firmware doesn't even have it (non-existent in the v2 release of this product).

I'm not saying this unit doesn't work, it does, but it offers nothing more than a standard AP costing much much less. There are some features such as VLANs and maybe if that's a key requirement, then it can work for you (v2 models).

However, if you're looking for performance/reliability basics in "harsh" environments, you will do just as good, or poorly, with any other "standard" home use AP.
works but lots of trial and error due to poor documentation . Got 2 of these to make a local area network between myself and neighbor down the street. We have what I think is a fairly simple network (router to ap to remote ap), and between the awful documentation, terible support (besides language issues, they just won't answer the questions you ask), and a web interface issues, I am quite disappointed. 2 stars because it took my friend (a guy with multiple network certifications), and myself (with a bs in computer science), many evenings to get it to work. Would have done 1 star if we never got it working. Even now, we don't have the house-to-house thing inplace due to needing a better antenna. My advise: go straght to the forums for support if you can't get it working on the first 10 tries. This might be a good piece of harware, but without good software and good support, it is not worth buying.


Feature NETGEAR WG302 ProSafe 802.11g Wireless Access Point

  • High-speed networking with IEEE 802.11g
  • Powerful RF management and control with AutoCell technology
  • Wi-Fi Protected Access (WPA) security support
  • Wireless Distribution System supports bridging and repeater modes
  • Two detachable 5 dBi antennas




Related Post

Product Details

EAN : 0606449030365
UPC : 606449039467
MPN : WG302NA
Brand : Netgear
Weight : 4 pounds
Height : 5 inches
Length : 12 inches
Width : 10 inches
Binding : Personal Computers
Format : CD
Hardware Platform : Pc
Manufacturer : Netgear Inc
Model : WG302NA
Operating System : Windows
Platform : Windows
Publisher : Netgear Inc
SKU : 74143
Studio : Netgear Inc

Where To Buy


You can buy NETGEAR WG302 ProSafe 802.11g Wireless Access Point on Amazon . Click here to Read More

PowerLink Outdoor Plus IEEE 802.11n (draft) - Wi-Fi Adapter


Price : Too low to display
BUY NOW
Premiertek PowerLink Outdoor Plus IEEE 802.11n (draft) - Wi-Fi Adapter PL-2712N Network Adapters - Wireless

This review is from : PowerLink Outdoor Plus IEEE 802.11n (draft) - Wi-Fi Adapter
Good choice. . Aha this might be just something worth buying! This thing can really pick up a signal. Through metal at a range that surprises. Let's all share the internet! The N type wifi is draft, so an access point transmitting at 5 GHz will not help the range, as this unit won't even receive that. It receives the 2 GHz range, or N draft, (also the G band). Backwards compatible to G and B, you just may get better range with 5 GHz equipment, but it will cost you to find a long range N adapter operating at 5 GHz - not a 5Ghz access point though. So, what I am saying is that for your router's wireless, or if using a separate access point for wifi, it has to be b, g, or n draft, specifically 2GHz, not 5, which is also known as 802.11a. This probably can be tweaked in your wifi setup. If this sounds complicated, just settle for the common default G band, maybe the datastream is abit slower than n, but one thing I did test was the range - it's the same with either g or n using it. I live in a Hi Rise and it went from the 12th floor across and to the 10th with about a loss of half the signal. I also bought one and took it apart, too. Inside, the USB cable, which is a long long 5 meters, also terminates with another plug. So, if the cable twists and breaks, you can just buy another cable and open the unit, which is not glued, you just push two plastic clamps, and plug in the new cable and snap the lid on again. Comes with software AP functionality. Ralink chip. Plug and Play with Windows 7, no need for the CD, it will fire up on it's own just by plugging it in.

Product Image


Feature PowerLink Outdoor Plus IEEE 802.11n (draft) - Wi-Fi Adapter

  • Premiertek PowerLink Outdoor Plus PL-2712N 802.11n Wireless LAN USB 2.0 Adapter General Features:
  • Chipset: Ralink RT3070 Standards: IEEE 802.11b/g/n Frequency band: 2.412 ~ 2.484 GHz
  • Modulation Method: 802.11b: BPSK, QPSK. CCK; 802.11g: OFDM USB 2.0 interface (supports USB 1.1)
  • 400% performance and 600% distance (over 2 dBi antennas) Up to 2000m distance 12 dBi panel antenna
  • WMM (Wi-Fi Multimedia support)




Related Post

Product Details

EAN : 0813538011345
UPC : 813538011345
MPN : PL-2712N
Brand : Premiertek
Weight : 3 pounds
Height : 5 inches
Length : 9 inches
Width : 9 inches
Binding : Electronics
Manufacturer : Premiertek
Model : PL-2712N
Publisher : Premiertek
SKU : IGRMDM1154
Studio : Premiertek

Where To Buy


You can buy PowerLink Outdoor Plus IEEE 802.11n (draft) - Wi-Fi Adapter on Amazon . Click here to Read More

Viewsonic WRLS ACCES/POINT/REAPTER/BRIDGE ( WAPBR-100 )


Price : Too low to display
BUY NOW
Three products in one compact design ¿ you choose. The ViewSonic WAPBR-100 three-in-one AP/Repeater with 802.11g connectivity EXTENDS YOUR WIRELESS NETWORKING OPTIONS. You may use it as a WIRELESS ACCESS POINT for networking internal users allowing them to wirelessly share files, printers and other peripherals. Extend your WLAN range by using the WAPBR-100 as a REPEATER, relaying the wireless connection to remote users within the WLAN. Also acting as a BRIDGE, the WAPBR-100 can turn your Ethernet-connected game consoles, TVs and PCs into wireless devices. This 3-in-1 box boasts a STYLISH, COMPACT DESIGN THAT OFFERS HIGH PERFORMANCE wireless 802.11g connectivity and high-level security features.

This review is from : Viewsonic WRLS ACCES/POINT/REAPTER/BRIDGE ( WAPBR-100 )
A gem once DD-WRT firmware is installed . The original firmware on this device was extremely frustrating. Once I updated the firmware to DD-WRT, I was able to easily use this device to convert my pair of ethernet network printers into wireless printers by hooking them up to a switch that was connected behind this device in AP client mode. DD-WRT supports WPA2-Personal with AES encryption for a very secure connection (not available in the original firmware).
Viewsonic WRLS ACCES/POINT/REAPTER/BRIDGE ( WAPBR-100 ) Reviews
working as AP Client but not repeater or bridge . I configured mine to work by connecting to it manually with a static IP of 192.168.1.xx and going to 192.168.1.2 (the built in web interface at default settings). I switched to AP Client on the tab that sets the operating mode. I then clicked the scan button and picked the AP I wanted to connect to off the list. Once it finally came back to the mode page with this info filled in (in blue, not red, red may mean it isn't working)I clicked apply. I never changed the SSID or channel or any of that. Then after the wapbr-100 reset itself I went and set my computer back to obtaining ip and dns automatically. Then after a few seconds it aquired an ip address from the AP and I was on the web. I tried this same proceduree in wireless bridge mode and in repeater mode, but neither of those worked. I also tried the thing where you set the ssid and channel to the same as the router/AP you are trying to connect to, and it worked, but I don't believe it was necesary unless people who use encryption need these settings changed. I don't use any encryption.
Viewsonic WRLS ACCES/POINT/REAPTER/BRIDGE ( WAPBR-100 ) Opinions
Works well horrible documentation . I'll echo the previous reviewer -- the documentation is terrible for this unit. Most people are buying it as an AP Client (i.e. to connect an ethernet device to an existing wireless network). Thanks to the previous reviewer (and no thanks to Viewsonic) I was able to get this device working properly. A few points I'd like to add:

1) The WAPBR-100 needs a static address that is within the IP range of the wireless router you are using. Note that the default address of 192.168.1.2 is not within the default range of Netgear routers. Change the IP address of the WAPBR-100 to something like 192.168.0.30. Theoretically, to avoid collisions with the DHCP server in your router, you should "reserve" this address in the router.

2) If you are restricting access to the router based on MAC address (MAC address filtering), be sure to add BOTH the MAC address of the WAPBR-100 AND the MAC address of the device you are attaching to the WAPBR-100.

3) Once you have the WAPBR-100 configured and the device working, you can change the attached device (usually a PC) to use DHCP rather than a static IP address. It will then obtain an IP address, along with the DNS information, from the router.

Too bad Viewsonic has such poor documentation. I think this is a good quality product otherwise.
It appears to work OK but documentation is sparse . I bought this unit specifically for the role of an Access Point (AP) client--essentially, an 802.11g adapter that connects to my computer via wired Ethernet instead of USB or PCI. This unit fulfills that role pretty well, once I figured out the right procedure. It handles WPA-PSK (TKIP) as well as no-encryption, but I could not get it to handle WEP encryption. WEP is crackable anyway.

Many reviewers attack this unit for its repeater and bridge capabilities, or lack thereof. But any good Internet reference will tell you that repeater and bridge capability is not fully standardized, and cannot be expected to work properly except between units of the same make and model. Most reviewers, I think, erroneously expected this unit to work as a bridge or repeater with a router or AP of some other make or model.

I did not try to use this unit as an AP (host).

This was my procedure to set up the unit as an AP client:

1) Set up the wireless router for either WPA-PSK encryption or no encryption at all.

2) Connect the ViewSonic AP client to the desired computer, via wired Ethernet.

3) Set the desired computer's IP address statically, to 192.168.1.150. Set the gateway and DNS addresses to that of the wireless router.

4) Bring up a Web browser on the desired computer, and go to 192.168.1.2 (the IP address of the ViewSonic).

5) Set the ViewSonic's operating mode to AP client. It will need the MAC address of the wireless router. You might be able to browse for it using a Scan button, but otherwise just get it from your router and type it in here. Apply settings.

6) Set the 802.11g parameters to the same as on the router--e.g., mixed b and g speeds, security/encryption of WPA-PSK. Apply settings.

7) Try to go to a Web site. If connection fails initially, reboot the computer.

After everything is working, one could probably switch the computer to use DHCP instead of the static 192.168.1.150; but I just left it that way.

Cons Review
Move on... . I am an advanced user and found this product to be incredibly frustrating. I could not make it work as a bridge or repeater. Checking Viewsonic's website yields no firmware updates (how is this possible?) and no advice on how to make it work in these modes. There are other products out there... don't waste your time here.


Feature Viewsonic WRLS ACCES/POINT/REAPTER/BRIDGE ( WAPBR-100 )

  • Expand your wireless networking coverage to eliminate dead spots
  • Works with both 802.11b and 802.11g wireless networks
  • Supports 64 and 128-bit WEP encryption
  • Compatible with Windows 98SE, Me, 2000, and XP
  • 24/7 Toll free live Customer & Technical support.




Related Post

Product Details

EAN : 0766907070613
UPC : 097564303371
MPN : WAPBR100
Brand : ViewSonic
Weight : 2 pounds
Height : 3 inches
Length : 10 inches
Width : 9 inches
Binding : Personal Computers
Manufacturer : ViewSonic
Model : WAPBR-100
Publisher : ViewSonic
SKU : DHWAPBR100
Studio : ViewSonic

Where To Buy


You can buy Viewsonic WRLS ACCES/POINT/REAPTER/BRIDGE ( WAPBR-100 ) on Amazon . Click here to Read More

D-Link DE-805TP 10Mbps Ethernet Mini Hub 5-Port


Price : Too low to display
BUY NOW
The DE-805TP is a five-port 10Base-T Ethernet hub that is ideal for very small workgroups on unshielded twisted-pair cables. This IEEE 802.3 compliant hub provides five RJ-45 ports for normal connection to stations and/or for cascading to another hub to increase the number of ports on your network. It comes with LED indicators for power and collision, plus one for each port to monitor the network activity and the link status between the port and the connected station. Lightweight and compact, this hub can be installed almost anywhere, even at sites with limited space.

This review is from : D-Link DE-805TP 10Mbps Ethernet Mini Hub 5-Port
Great for home networking . Look -- I don't need a great hub. Obviously, this is definitely NOT something you'd want to support a major corporate network. When it comes to inexpensive home networking, though, this product is everything you'd ever need. Our 3-computer home network has never been jammed, we have never experienced any difficulties with the hub, and setup was a complete breeze. Just make sure you buy the right cables for the job (there's yellow patch cables, and regular ethernet cables -- talk to your local computer store representative to sort out this issue.. they'll know). I personally knew nothing about home networks before I decided to set up my own, but all in all I'm definitely glad I decided to use this inexpensive option to set up our network. You'll definitely appreciate the nice light up LED's which tell you when and where data is being transferred. Did I mention we even use the hub to give cable modem access to all 3 of our computers, with only one actual cable modem? Isn't that great?
D-Link DE-805TP 10Mbps Ethernet Mini Hub 5-Port Reviews
Very complete for home networking . I use this product to link 3 computers and a cable modem connection and it works like a charm. Very space efficient and the front panel LED's let me know each port's status. I have not had any complications with this hub and seems to work effortlessly. Great hub.
D-Link DE-805TP 10Mbps Ethernet Mini Hub 5-Port Opinions
D-Link's DE-805TP is a Five-Star Hub. . This D-Link hub is very easy to install and works well in a busy network environment. I run a small marketing business from home and this small DE-805TP hub networks 4 computers and a laser printer with no hassles. The best feature of this hub is its compact-sized shape. I looked at other brands and D-Link seems to offer everything at a better price.


Feature D-Link DE-805TP 10Mbps Ethernet Mini Hub 5-Port

  • 5-port 10Base-T Ethernet minihub
  • 10 Mbps speed
  • Uplink available for easy expansion through UTP
  • LED indicators make diagnostics easy
  • Space-saving design




Related Post

Product Details

EAN : 0790069209352
UPC : 790069209352
Brand : D-Link
Weight : 2 pounds
Height : 3 inches
Length : 9 inches
Width : 7 inches
Binding : Personal Computers
Manufacturer : D-Link
Model : DE805-TP
Platform : Windows NT
Publisher : D-Link
Studio : D-Link

Where To Buy


You can buy D-Link DE-805TP 10Mbps Ethernet Mini Hub 5-Port on Amazon . Click here to Read More