eSata / Sata / IDE PCI RAID Controller Card VIA VT6421A Chip Set

Price : Too low to display

2 identical sata port can support Level 0, RAID Level 1. In Bulk pack, no retail box.

VIA VT6421 Chipset.

Compatibility: Works for Windows 98 SE, Me, 2000, XP, Vista

This review is from : eSata / Sata / IDE PCI RAID Controller Card VIA VT6421A Chip Set
Inexpensive and it delivers . There are a lot of negative reviews about this product out there, and yes, most of their gripes are valid. This card won't support 300G transfers, and it won't be detected before booting the OS, so you can't use it for a system drive. But it does everything it promises: supplies you with a SATA RAID controller, and even an extra IDE bus.
The long and the short of it is - a hard drive can barely keep up with the 150G transfer rate of the protocol version this uses, so unless you're using solid state storage, that gripe doesn't count. If you just want to add more storage to your existing computer, or just want to add SATA to a non-SATA computer, this works like a charm. Setup was easy, it worked right out of the box. I highly recommend it.
Some background on me - I have two electrical engineering degrees, and have worked in IT off and for the last 20 years. In my opinion, this is a good product for the money.

eSata / Sata / IDE PCI RAID Controller Card VIA VT6421A Chip Set Reviews
No problem with it . My cheap SATA card I got from eBay died, so I decided to buy another one with some assurance (Amazon reviews). Put the card in, Ubuntu 8.0.4 Server recognized it fine. Hookup my Seagate 1.5TB and it's working fine so far. I didn't test speed or anything, I just know I was able to read/write to that the 1.5TB drive w/ this SATA and so far it's working fine (~1 month). I'll update if this card ever give me trouble.

eSata / Sata / IDE PCI RAID Controller Card VIA VT6421A Chip Set Opinions
card works - after os loads . SATA card works in XEON XP system - after boot - I was hoping it would work off BIOS so I could Ghost system to SATA instead of problematic IDE. It works well after boot using a driver.

Just plug it in and it works. . Great little SATA/e-SATA card. I just plugged into the PCI slot on my old XP system and it works. Just a note: As was mentioned in other posts, only two ports work at a time; either the two internal SATA ports, or one SATA and one e-SATA. Still, a good little card for the price.

great for compatibility . The reason I got this one was because I had a few devices that weren't compatible with the integrated controller on my PC. I have yet to plug anything into this product with which it wouldn't interface.

Works well . Arrived quickly and it works. Came with a cable, which was nice, so I didn't have to buy it separately.

My computer didn't seem to recognize it at first, but after a couple reboots, it did.

Great combo card . This PCI card provides an upgrade path for older PC's without SATA support. It allows you to configure the SATA ports for internal or external use (with limits). Works fine under Windows control, but no onboard BIOS so the usefulness at boot time is more limited. Although I had no need for an extra IDE connection, the board also includes one IDE socket.

Must buy for PC's lacking sata ports. . This controller card works beautifully on a lot of Sata devices, I have since used it for a hard drive, and 2 DVD drives and both were recognized perfectly on Windows XP SP2. Very cheap yet good quality. Recommend definitely especially for older pc's lacking Sata ports. Buy it.

Awesome inexpensive RAID solution . I have this card installed on an E-machine running XP for the past week, as a RAID-1 mirror configuration. It is controlling two W.D. 640GB SATA drives and has eased my mind about loosing important data! with this inexpensive investment (one raid card, cables, power adapter and two sata drives) I can back up my three machines and also store my CCTV video. set up was easy, if you buy OEM drives make sure you have the necessary hard drive jumpers to slow down the hard drives (1.5gb transfer rate instead of the 3gb they run at) western digital has literature to show the jumper settings. I had the jumpers and i bought everything else hear at Amazon. i shopped around and I found the parts at amozon were the best price and value other sites were crooked!

Cons Review

Didn't work well at all for eSTATA Hard Drive . Bought this card specifically for doing system backups to an external hard drive. I can't attest to how well the internal SATA or IDE ports work. Installation went OK, Win7 correctly identified it and automatically downloaded drivers for it from Windows update. So I thought "Hey great, no need to fool with the mini CD driver disk labeled SUTUP SOFTWARE (sic)". I was averaging about 25-30 Mb per second transfers on the external hard drive via USB 2.0, and expected to multiply that by at least 2-3 times. But sadly, this card's eSATA port would jump off the starting block at about 75 Mb per second, then very quickly slow down to 50, then 25 then 10 and within 30 seconds transfer rates were down to 2-3 Mb per second. I benchmarked the drive using this card's eSATA port with no less than 6 different hard drive benchmark utilities, and every single one of them timed out (program not responding), due to bottlenecked inability to access and test the drive. I thought maybe the Win7 obtained driver was a possible culprit so I used the SUTUP SOFTWARE (sic) mini CD and it had NO DRIVERS for OS newer than XP on it, and all it did was install a startup RAID Tool that I didn't want or need and had trouble getting rid of (wouldn't uninstall through Control Panel - had to do it the brute force way). Then I searched the web and found a Vista driver for it that I also tried - it had a newer date by one month than the Win7 driver, but it was much worse - the whole OS bogged down with it in use and it took almost FIVE MINUTES for the external hard drive to even be recognized. I re-installed the original Win7 drivers and did one last eval on it. No dice. Ten minutes after commanding a 4 Gb file to be copied to the external drive, less than 2 Gb was transferred and the transfer rate was down to 2 Mb per second. What was I thinking expecting more from a $17 card? Didn't work for me.

Feature eSata / Sata / IDE PCI RAID Controller Card VIA VT6421A Chip Set

• 1 eSata ports + 2 Sata Port + 1 IDE Port, PCI Interface. Not bootable.
• SATA port trans speed can up to 1.5G (150Mbps). Supports Windows 98 SE, Me, 2000, XP, Vista
• eSata port and left upper SATA port is shared, control by onboard jumper (Instruction is on CD).
• Complies with Serial ATA specification Revision 1.0, not for SATA Version 2.
• Ultra ATA-133 IDE interface Extension to Ultra DMA-133 interface for up to 133MB/s transfer rate.

Related Post

• Best Connectivity Firewire 2-Port 1394b and 1 Port 1394a (2B1A) PCMCIA
  Cardbus
• HOTER Mini PCI-E to PCI-E Wireless adapter +3 antenna WiFi
• StarTech.com PCI Express X1 to X16 Low Profile Slot Extension Adapter
  (PEX1TO162)

Product Details

MPN : vt6421a-red
Brand : Tenext
Weight : 1 pounds
Height : 1 inches
Length : 6 inches
Width : 5 inches
Binding : Electronics
Model : vt6421a-red

Where To Buy

You can buy eSata / Sata / IDE PCI RAID Controller Card VIA VT6421A Chip Set on Amazon . Click here to Read More

Quick Release Plate for the RC2 Rapid Connect Adapter

Price : Too low to display

Always keep an extra quick release plate on hand, you will never know when you may need one. This RC2 plate uses a standard 1/4-Inch-20 screw. This replaces the 3157N. Attachment: 1/4-Inch screw; color: black; material: aluminum; weight: 0.09 lbs. Look for our discounted set of 2 on Amazon

This review is from : Quick Release Plate for the RC2 Rapid Connect Adapter
Plate Vastly Exceeded My Expectations . Although this is a reproduction, it really does the job. There is no difference between the original and the copy. It perfectly fits into the tripod head and the product is really good.

Cons Review

Not the Plate for A Valuable Camera . I thought I was getting a great price on a simple item; not so. This is NOT the Manfrotto RC2 Rapid Connect Adapter; it's an improperly tooled knock-off. At least the two I ordered were.
Because I bought another DSLR camera I needed another RC2 RCA to make connecting quick and easy. I ordered a second one just in case I wanted one on my point-and-shoot camera once-in-a-while. When they arrived I tested them. They failed the test: they are NOT properly tooled and would NOT allow the pin to go up inside the latch which would lock the plate (and the camera) from accidental release! Can you imagine your DSLR camera falling from a tripod or monopod because your hand brushed across a latch that wouldn't lock on a ten-dollar connecting plate? No.No. No.
I'm tossing them in the garbage so they will NEVER be used on a camera. I wouldn't be surprised if DBROTH runs some tests on the knock-offs and pulls them off their site (and AMAZON's) because I'm sure they don't want their good name tarnished by selling defective products.
I would have given the product no stars but the guide tells me that "ONE STAR = I HATE IT" so I gave it the one star.
I ordered the real MANFROTTO brand from AMAZON.COM when these two plates failed their test. The MANFROTTO plates passed with flying colors. Looking at these plates with the naked eye will fool you.

Product Image

Feature Quick Release Plate for the RC2 Rapid Connect Adapter

• Precision crafted makes changing cameras fast & easy
• Industrial grade aluminum construction
• Grooved rubber pad provides traction
• +protects camera base
• Keep one on all your cameras & camcorders

Related Post

• ViewSonic NMP-560 Industrial Grade 1080P Network Media Player
• Sony DMXWL1 BRAVIA Wireless HD Link
• CEENO Digital Signage Appliance

Product Details

EAN : 0989898233472
UPC : 989898233472
MPN : P2CR
Brand : D.C.
Binding : Electronics
Manufacturer : D.C.
Publisher : D.C.
Studio : D.C.

Where To Buy

You can buy Quick Release Plate for the RC2 Rapid Connect Adapter on Amazon . Click here to Read More

TP-Link TL-SG1005D 5-Port Unmanaged Gigabit Desktop Switch

Price : Too low to display

Gigabit Switch 5-Port Unmanaged 5/10/100/1000M RJ45

This review is from : TP-Link TL-SG1005D 5-Port Unmanaged Gigabit Desktop Switch
It stays cool and that means I save money! . I needed another switch and I bought this one because it was inexpensive, was supposed to be energy-saving, and was well-reviewed across the net.
It works very well, and it runs cool - barely warm to the touch.
Compare that with my Cisco 5-port gigabit switch which is always HOT to the touch.
Heat is wasted electricity and ultimately challenges component reliability.
I would recommend this product to anyone.

TP-Link TL-SG1005D 5-Port Unmanaged Gigabit Desktop Switch Reviews
Very nice inexpensive switch! . I ran out of ports on my router, so I purchased the switch to allow additional connections to the LAN. Works like a champ! They are inexpensive, very easy to install, and I Highly recommend them based on my experience with them! You cannot go wrong!!

Good product . Good little unmanaged switch - was able to plug it in and get gig speeds. Seems to be working pretty well so far.

TP-Link TL-SG1005D 5-Port Unmanaged Gigabit Desktop Switch Opinions
Best value . The TP-Link 5 port switch was all I needed to split the connection from the cable internet modem to our two computers with maximum speed. I'm not big on wireless, and this does the job most effectively. Its uncomplicated, you just plug in the AC adapter, plug in your CAT6 cables and you are set. You need CAT6 cables, or else there is no point in upgrading to the gigabit swtich. CAT5 cables are only good for the 10-100 speeds.

It works what more can you ask? . I don't expect much from a switch. this delivers it.

it works out of the box. that's what i want.

no muss, no fuss.

Does what its supose to . I have 2, both have been working for over 2 months with out needing any attention. But the speed is not as fast as I was expecting, I gotten a max of 40MB second but usually its around 20-25MB. The computers connected to though my dlink dir-655 router gets about 80-90MB second, but I guess thats $20 vs $70.

Good gigabit switch . I've been needing some gigabit switches for giving Internet access to my TVs, Xbox, Satellite box, Roku, etc... and these fit the bill quite nicely.

Save money with good performance! . If you need a good gigabit switch and need to save money, this is a great option for you. Performance is great. I have noticed any problems in data transfer speeds or anything else. If you need more control within your switch, then this might not be the best for you. However, for someone that needs a good performing switch that is reliable and affordable, I recommend this for sure.

Gigabit Switch . It works as advertised, noted NO slow down in traffic, and was transparent to the router.I have daisy chained my growing network without having to go to an 8 port switch.

It works . Its a low priced gigabit switch. Considering all switches do the same thing, why pay more? This one has had zero problems since it was installed. Cheap and effective, don't even know its there cause it does what it is supposed to.

Feature TP-Link TL-SG1005D 5-Port Unmanaged Gigabit Desktop Switch

• Adopts Green Ethernet technology, saving power and cost Supports IEEE 802.3x flow control for Full-Duplex mode and backpressure for Half-Duplex mode
• Standards and Protocols: IEEE802.3, 802.3u, 802.3ab, 802.3x, CSMA/CD, TCP/IP Ports: 5x 10/100/1000Mbps Auto-Negotiation RJ45 ports (Auto MDI/MDIX)
• Basic Function:
• Wire-speed Performance MAC Address Auto-Learning and Auto-aging IEEE802.3x flow control for Full-Duplex Mode and backpressure for Half-Duplex Mode
• Backbound Bandwidth: 10Gbps MAC Address Table: 1k
• 100Base-Tx: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100? STP (maximum 100m) 1000Base-T: UTP category 5, 5e cable (maximum 100m)
• Forwarding Rate: 10BASE-T: 14880pps/port 100BASE-TX: 148800pps/port 1000BASE-T: 1488000pps/port
• LED Indicator: Power, Link/Act (100M, 1000M) Safety & Emission: FCC, CE Power: External Power Adapter
• Transmission Method: Store-and-Forward Network Media: 10Base-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100? STP (maximum 100m)

Related Post

• Belkin USB 2x1 Peripheral Switch (F1U201)
• NETGEAR 5-port Home Theater and Network Gaming Hub GS605AV
• NETGEAR PROSAFE 48PT 10/100-SMART SWITCH W/ 2PT GETH ( FS750T2NA )

Product Details

EAN : 0845973020255
UPC : 845973020255
MPN : 6935364020255
Brand : TP-Link
Weight : 1 pounds
Height : 3 inches
Length : 11 inches
Width : 8 inches
Binding : Personal Computers
Format : CD-ROM
Hardware Platform : Pc
Manufacturer : TP-LINK
Model : TL-SG1005D
Operating System : Windows
Platform : Windows
Publisher : TP-LINK
SKU : 317121
Studio : TP-LINK

Where To Buy

You can buy TP-Link TL-SG1005D 5-Port Unmanaged Gigabit Desktop Switch on Amazon . Click here to Read More

Rosewill RNX-N100 IEEE 802.11n USB2.0 Wireless-N 2.0 Dongle

Price : Too low to display

* The easiest way to upgrade your system into wireless N network.
* Connect your PC/NB to a wireless network in minutes using high speed USB2.0 interface.
* 8x the speed and 4x the coverage over wireless G .
* 802.11b/g/n 2.0 provide further coverage, less dead spot and higher throughput.
* MIMO technology thourghput up to 150 Mbps for Ralink 1T2R solution.
* Supports MIMO technology with Built-in 2 Internal Printed Antennas
* Easy setup with Wi-Fi Protected Setup (WPS).
* Security support WPA/WPA2 (AES, 64,128-WEP with shared-key authentication).
* Support Cisco CCS V1.0, V2.0 and V3.0 compliant WPS.
* Wireless Multimedia Enhancements Quality of Service support (QoS) / enhanced power saving for Dynamic Networking.
* RNX-N100 is also fully compatible with IEEE 802.11b/g standard.
* Compatible with Windows 2000, XP, Vista 32 and 64 bit/MAC 10.3/10.4/10.5
* LED indicator for Power/Link
* Advanced power management for Low power consumption.
* NOTICE: RNX-N100 doesn't support Linux now.
*
* **Maximum wireless signal rates referenced to IEEE Standard 802.11 specifications. Actual data throughput speed will vary depending by network conditions and environments, such as network traffic, building materials, local radio frequency interference, and other conditions.

This review is from : Rosewill RNX-N100 IEEE 802.11n USB2.0 Wireless-N 2.0 Dongle
Caution: Only Wireless N ! . I can't use this device, because it is only wireless N. I'll need to replace my router to use it. So it will sit dormant until I decide (for reasons other than this application) that the router needs to be replaced.

So the purpose of this review is simply to warn other potential buyers that it is only N capable.

Feature Rosewill RNX-N100 IEEE 802.11n USB2.0 Wireless-N 2.0 Dongle

• 802.11b/g/n ver 2.0
• 1T2R Design up to 300Mbps
• 8x speed and 4x coverage than g

Related Post

• BlueProton Gsky 1000mW 1W 802.11b/g High Power WiFi USB Adapter w/ 9dBi
  Omni Antenna
• Wireless USB Adapter Rangebooster N Draft 802.11N
• 3 Port Firewire Adapter Card

Product Details

EAN : 0898745017274
UPC : 898745017274
MPN : RNX-N100
Brand : Rosewill
Weight : 1 pounds
Height : 2 inches
Length : 7 inches
Width : 6 inches
Binding : Electronics
Manufacturer : Rosewill
Model : RNX-N100
Publisher : Rosewill
SKU : UK-Rosewill-RNX-N100
Studio : Rosewill

Where To Buy

You can buy Rosewill RNX-N100 IEEE 802.11n USB2.0 Wireless-N 2.0 Dongle on Amazon . Click here to Read More

TRENDnet 8-Port USB/PS/2 Rack Mount KVM Switch TK-803R (Black)

Price : Too low to display

8 x 1 - 8 x HD-15 Keyboard/Mouse/Video - 1U - Rack-mountable - Analog KVM Switch

This review is from : TRENDnet 8-Port USB/PS/2 Rack Mount KVM Switch TK-803R (Black)
watch out for cables . I purchased one of these from Amazon and returned it (after talking to Trendnet tech support) because it didn't work--tried 3 computers, 3 mice, 4 keyboards--got a replacement, and it had the same problems.

I arranged a return (for refund) for the second one and then had a thought--perhaps the Trendnet 8 port KVM uses different KVM->computer cables than the 4 port I was replacing. The cables look the same--DB15 on the KVM end, DB15 and USB on the computer end. To shorten a painful story, you apparently can't use the same cables on the 8 port switch as you can on the 4 port switch. I'm too busy to look into all the details, but make sure that the cable you buy say that they will work with the switch that you buy...despite looking the same, they are not. Groan

TRENDnet 8-Port USB/PS/2 Rack Mount KVM Switch TK-803R (Black) Reviews
Works great at a great price . I really wasn't sure what to expect from this product. Based on it's price, I didn't expect much.
It was easy to setup. The construction seems durable. I now have it hooked up in a server room with eight servers and it works great. It hasn't skipped a beat.
The only negative would be the video quality dropped slightly when run through this box. Not a big deal since you will usually use this with servers.

Great Product . Great product...

Works just like the ad...easy to setup and just works..

Nohacks

TRENDnet 8-Port USB/PS/2 Rack Mount KVM Switch TK-803R (Black) Opinions
Wireless KB & Mice Need not Apply . I have the KVM installed and working. I tried to use with a wireless keyboard and mouse and had constant issues with the keyboard and mouse ceasing function. with a regular keyboard and mouse it works fine, even using a PS/2 keyboard and a USB mouse, but wireless devices will not work properly. Also, you must have the item selected when you are booting it otherwise you will not be able to control the computer which means you have to manually power-up on a power failure instead of having systems set to auto-boot when power is restored. Has the standard hit scroll lock twice and then the number to switch between stations.

Easy to install and use . It does what it is supposed to do without problems. Looks good mounted on a rack and it's not expensive. What else can you ask for?

Cons Review

worthless with USB keys/mouse in our situation . This thing is nearly useless with USB keyboard/mouse, at least in our situation.
The mouse won't work at all for 20-30 seconds (cursor is frozen), then might work for 3-10 seconds, then won't work again. Repeat. Mouse clicks are also bad, sometimes you have to click 15-20 times for it to "take".
Keyboard commands are also compromised.
Trendnet tech support had nothing to suggest other than the usual litany of "what cable are you using, have you tried a different keyboard and mouse" etc. Of course we are using Trendnet cables, have tried 4 different brands of keyb/mouse, and still no usable results.
I can't condemn the product wholesale, perhaps the PCs we are using have some magic, voodoo settings that preclude their use with a KVM switch (he said facetiously). Buyer beware.

Buyer Beware: This thing just doesn't work . I purchased this item with the intent to control six different machines with a single keyboard and monitor. I was obviously disappointed when this device was unable to recognize the numerous known-good USB keyboards that I attempted to use. I would strongly caution any potential consumers of this product to consider a similar product from IOGear instead. That is, unless you enjoy going to your local UPS store to return defective merchandise.

Broke after 2 years . Pros:
- It's 1/3 the price of most other 8-port USB KVMs on the market.

Cons:
- No on-screen display makes it harder to set up, use, and troubleshoot
- It stopped working after 2 years of light use (tried resetting to factory defaults, still borked)

Product Image

Related Post

• HP J9078A#ABA 1400-24 G 24-Port 10/100/1000 ProCurve Switch with 2 Mini
  GBI Ports Unmanaged Switch
• Cisco SR224 24-port 10/100 Switch - 13-inch chassis
• D-Link DKVM-8E 8-Port Rack Mount KVM Switch

Product Details

EAN : 0710931304305
UPC : 710931304305
MPN : 0710931304305
Brand : TRENDnet
Weight : 6 pounds
Height : 3 inches
Length : 18 inches
Width : 12 inches
Binding : Personal Computers
Format : CD
Hardware Platform : Pc
Manufacturer : TRENDnet
Model : TK-803R
Operating System : Windows
Platform : Windows
Publisher : TRENDnet
SKU : ELA457332
Studio : TRENDnet

Where To Buy

You can buy TRENDnet 8-Port USB/PS/2 Rack Mount KVM Switch TK-803R (Black) on Amazon . Click here to Read More

TRENDnet 108Mbps 802.11G MIMO Wireless PCI Adapter

Price : Too low to display

Box Contents: TEW-603PI, utility and driver CD, multi-language quick installation guide
The TRENDnet TEW-603PI 108 Mbps 802.11g MIM Wireless PCI Adapter gives you wider coverage. Thsi MIMO wireless PCI adapter connects with your wireless network seamlessly, without performance degradation. It also supports universal connectivity with 802.11b and 802.11g networks, reaching speeds of up to 108 Mbps with either WPA or WEP encryption. Supports 64/128/152-bit WEP, WPA(AES-TKIP) and WPA-PSK encryptions 1 5 dBi detachable dipole antenna (reverse SMA connector), 1 2 dBi Fixed Dipole Antenna Low interference, high susceptibility guarantee Simple user setup and diagnostics utilities Compatible with Windows 2000/XP (SP1 & SP2), 2003 Server Frequency - 2.412 ~ 2.484 GHz Channels - 1 ~ 11 US, 1 ~ 13 EU FCC and CE certified Dimensions(LxWxH) - 4.8 x 2.5 0.2 (122 x 64 x 6 mm) Weight - 1.8 oz. (50g)

This review is from : TRENDnet 108Mbps 802.11G MIMO Wireless PCI Adapter
TRENDnet seems to be a good brand . I have had no problems with this wireless PCI Card. I bought it to replace a Linksys that did not have MIMO technology and I am very impressed with it's performance so far.

Cons Review

Good hardware bad software . After owning and tinkering with this for a while, I've found the hardware to be a good performer and that it works well IF you follow the right procedure to install it.

The supplied trendnet software is old (over a year as of this writing) and the one more recent update to the driver is not functional.

It appears that the software that comes with the product as I received it is the older 1.0.0.56 driver, which is microsoft WHQL certified. It appears that this driver does NOT support the WPA2 encryption method, as stated in the products marketing documentation. a newer driver (1.1.0.22) is posted on their web site and shows WPA2 support as its primary feature.

I've tried many configurations of both drivers with and without the trendnet supplied client configuration/monitoring/tray icon software. I get frequent windows blue screens (driver faults) with the WPA2 driver, windows explorer crashes and boot delays with the trendnet software.

I have had success in removing all traces of the trendnet software (if you installed any yet), download and unzip the 1.0.0.56 package from the trendnet web site to a directory, installing the card, and when windows boots and asks for it, telling it you do NOT want it to find the software itself and that you 'have disk', point it to the \driver subdirectory you created by unzipping the trendnet files, and using the windows networking configuration tools to configure your wireless connection including the security bits.

If you want WPA2, do not buy this card.

Under the trendnet and windows tools, I get three out of four bars of signal, which is less than my two laptops (dell 1390 equipped e1705 and intel centrino pentium M toshiba) but my actual download throughput is up to 20% higher with the trendnet card, so the MIMO/802.11g turbo capabilities are apparently providing some benefit, even though the reported signal strength isnt as good.

Do note also that i'm using this with a trendnet MIMO router that uses the same Atheros chip set. It may or may not work better or worse with routers that employ other chip sets, that do or dont have MIMO, or that do or do not employ a compatible 802.11g 'turbo' mode. Seems on reading reviews that some people enjoy less success with non atheros based routers but that may be just because they made the mistake of installing the trendnet software.

A parting shot, its fairly lame to release a product and then have the only update for the buggy software in over a year take the form of an uncertified, even more buggy driver...just so you can say you have a particular checkbox feature.

Feature TRENDnet 108Mbps 802.11G MIMO Wireless PCI Adapter

• Supports Ad-hoc (peer-to-peer) mode or infrastructure (AP-Client) mode
• Supports Super G technology with Data Rate up to 108 Mpbs (8x faster)
• Enhanced MIMO wireless coverage -- up to 800% more
• Dynamic Data Rate Scaling at 11, 5.5, 2 and 1 Mbps for 802.11b
• Dynamic Data Rate Scaling at 52, 48, 36, 24, 18, 12, 9, and 6 Mbps for 802.11g

Related Post

• Sabrent USB-802N Wireless 802.11n USB 2.0 Wifi MIMO Network 300Mbps
  WLAN adapter
• Alfa Wall Mount Passive Power Over Ethernet PoE Adapter - Dual Usage,
  Injector or Splitter
• Netgear RB-XE104 85Mbps Wall-Plugged 4-Port Networ

Product Details

EAN : 0710931502848
UPC : 710931502848
MPN : TEW-603PI
Brand : TRENDnet
Weight : 1 pounds
Height : 2 inches
Length : 8 inches
Width : 7 inches
Binding : Personal Computers
Manufacturer : TRENDnet
Model : TEW-603PI
Publisher : TRENDnet
SKU : 5557
Studio : TRENDnet

Where To Buy

You can buy TRENDnet 108Mbps 802.11G MIMO Wireless PCI Adapter on Amazon . Click here to Read More

Streaming Networks iRecord PRO Personal Media Recorder

Price : Too low to display

- iRecord Pro personal media recorder- Easily record/convert video and audio from almost any source and play it back on almost any device- Uses standard audio and video input connectors, making it compatible with almost every device manufactured in the last 40 years- Supported devices include: Apple iPod, iPod touch, iPhone, Apple TV, Apple Mac OSX, Microsoft windows, Zune 2, and Xbox 360, Creative Zen Vision, Sony Walkman Video, PSP and PS3, Nokia N93/N95, Toshiba Gigabeat, Sandisk Sansa, USB flash and hard drives- BlackIRPMR200BK

This review is from : Streaming Networks iRecord PRO Personal Media Recorder
Even with some minor issues It's still pretty nice. . Had this thing for at least several months, forgot when I bought it. But overall it's been very convenient. Long gone are the days of running wires from the TV to the computer and having to coordinate everything. Program a travel "thumb" stick with the type of format you want to record in... then press a button. It's nice to record TV and movie audio/video clips for my personal library.

Only annoying thing I found so far: every so often it freezes and stops recording, which sucks having to re-play the show over again. When it freezes on me, the light stays constantly on... I do find myself checking on the light often while recording, it's made me a little gun shy. But that's my only complaint.

Overall, it's nice to have a simple set-up by the TV area. Press of a button - done, it's recording. When finished, press one button, done. For how I record stuff, it works perfect.

Streaming Networks iRecord PRO Personal Media Recorder Reviews
Auto shuts down . The device would automatically shut down without warning. Does not notify wether or not the recording has stopped. Cannot copy copyrighted DVD's. But easy to use and performs as advertised.

Streaming Networks iRecord PRO Personal Media Recorder Opinions
at least 3 devices in one . Wanna digitalize your old LPs?
Wanna digitalize your old VHS tapes?
If you have an iPod, would you like to preprogram recording from a TV or set-top box wherever you happen to stay while traveling?

iRecord Pro is an answer for each of those purposes and, afaik, the only answer for all three. Works perfectly for me for all three purposes. Needless to say that anything you digitalize onto your ipod or usb stick (or smartphone) with the irecord pro is easy to burn as a cd (audio or video) or dvd afterwards.

I should mention that this is not (yet) an HD device. Audio, by the way, I reocmmend recording onto a stick at full/lossless/wave; Let itunes or whatever you use on the computer do the compression to whatever you prefer (I choose 256kb VBR) before you transfer the music to an ipod or a CD or whatever.

Excellent quality video encoding . I have been purchasing both professional and consumer grade video encoders for many years and the iRecord Pro is probably the best that I have come across for s-Video/composite input capture. It does a great job of turning even poor quality input into acceptable digitized media and is quite outstanding with good quality input. The de-interlacing capabilities are unparalleled in my experience, even with products costing 10-20 times the price. The MP4 video is a snap to trim with Apple's Quicktime Pro software and it can be imported via iTunes into the iPad easily. The resulting video is rather bulky at approx 1.1 GB per hour and so is more appropriate for local viewing rather than using as is on the Internet. The reports about the unit having a noise fan when in use are correct and that probably should be corrected by the manufacturer. I could imagine that being very inconvenient for some uses of this encoder but I can live with it for my purposes. Since the audio is captured directly, the noise does not get onto the final product. I have not tried transcoding from the media yet but expect that to work fine.

Feature Streaming Networks iRecord PRO Personal Media Recorder

• Full D1 (720x480/576) at 30/25 frames per second
• VGA (640x480) at 30/25 frames per second
• iPhone native resolution (480x320) at 30/25 frames per second
• PSP native resolution (480x272) at 30/25 frames per second
• QVGA(320x240) at 30/25 frames per second

Related Post

• D-Link MainStage TV Adapter for Intel Wireless Display (DHD-131)
• brite-View BV-980H Digital Antenna HD DVR with 320GB HDD Built-in, EPG
  Supported - Black
• Pinnacle PCTV To Go HD Wireless

Product Details

EAN : 0893183001021
UPC : 893183001021
MPN : PMR200-BK
Brand : Streaming Networks
Weight : 2 pounds
Height : 4 inches
Length : 10 inches
Width : 7 inches
Binding : Personal Computers
Manufacturer : Streaming Networks
Model : PMR-200
Publisher : Streaming Networks
SKU : TDIR-PMR200-BK
Studio : Streaming Networks

Where To Buy

You can buy Streaming Networks iRecord PRO Personal Media Recorder on Amazon . Click here to Read More

StarTech.com PCI Express to PCI Adapter Card (PEX1PCI1)

Price : Too low to display

This PCIe to PCI Adapter Card lets you use low profile PCI expansion cards in a server or desktop motherboard PCI Express slot. Compliant with PCI Express Specification 1.0a and PCI Specification 2.2, the adapter card connects through a PCIe 1x slot to provide a low profile PCI slot in its place. A spare full size bracket for PCI Express card is also included for use in larger desktop or server PCI Express slots. A versatile solution, the adapter card converts PCIe to PCI or PCI-X; a built-on LP4 power connector links the card to the computer power supply, allowing you to install universal voltage PCI cards (3.3V/5V).The adapter card offers an economical solution that lets you extend the usability of older or extra PCI Bus cards in newer PCIe capable systems. To ensure suitable installation in any low profile server or desktop computer, the PCIe/PCI adapter features an innovative bracket design that adapts and secures the low profile PCI or PCI-X card into the converted slot.

This review is from : StarTech.com PCI Express to PCI Adapter Card (PEX1PCI1)
Works as described . We are using this adapter to install ISDN adapters in rack servers that only have PCIe slots.
It works ok for what it is intended for, with no additonal drivers or whatsoever (at least under Linux). If you can live with the mechanics and the limitation to Low Profile cards, this device can provide a solution for you.

There are also external boxes where you can connect multiple PCI cards, but these are much more expensive, and have the disadvantage of "another box" and cabling.

So, zero stars to the server vendors who provide no solution to continue to use PCI cards,
and four stars to StarTech for providing a workaround.

StarTech.com PCI Express to PCI Adapter Card (PEX1PCI1) Reviews
May work for you depends on your situation. . I do not write reviews very often. I felt compelled to write one for the PEX1PCI1 in hopes it will help others.

Background:

I purchased the PEX1PCI1 to overcome my motherboard's limited PCI slot issue. Most motherboard manufacturers are slowly phasing out PCI slots and adding PCIe slots. My ASROck H67M motherboard only has one PCI slot. The PCI slot is populated with my Promise SATA controller card to control 4 of the 5 hard drives in my software Raid-5. I also wanted to use my Audigy 2 ZS sound card. In comes PEX1PCI1 from stage right to possibly fix my problem. The computer I am using the PEX1PCI1 in runs Ubuntu 10.04 64-bit.

Problem:

Based upon another review mentioning the PEX1PCI1 working in Linux, I decide to buy this and give it a go. I did realized the PEX1PCI1 is low profile and did not have a problem with that for what I was doing. I used this in my Ubuntu 10.04 64-bit computer. My problem came about when trying to use the PEX1PCI1 card with the Audigy 2 ZS in it AND the Promise SATA controller card in the PCI slot on the ASROCK H67M. I am not sure what was conflicting, but the sound card was not being recognized. The PEX1PCI1 was being recognized, but not the Audigy 2 ZS that was in it.

Here is the kicker: if I unplugged the 5th hard drive of the Raid-5 array (which was plugged into the H67M's SATA connector) the sound card would be recognized and work perfectly. Of course this meant I could no longer access my files which I wanted to use. I powered down my pc and reconnected the 5th raid hard drive to the H67M's SATA connector. I powered the pc on once again, what do you know the raid is seen and the sound card is no longer functioning. For kicks and giggles, I switched the Promise SATA controller card into the PEX1PCI1 and the Audigy 2 ZS into the motherboard's PCI slot. I powered on my pc and it had no video coming from the video card. My dream of using both the Promise SATA controller card and my sound card came crashing down. Obviously something "wonky" was happening. Yes, "wonky" is a very technical term :D

Other Thoughts & Findings:

I contacted StarTech's technical support and told them my situation. StarTech was quick to give me a response of:

"Thank you for your inquiry! We are sorry to hear about your technical difficulty.
It sounds like there may be a conflict between the PEX1PCI1 and something with your PC.
First, if possible attempt to install the PEX1PCI1 into a different Windows based PC to test if the PEX1PCI1 is functional.
If the card functions in the different PC the drivers for devices on the original PC such as video card, bios etc. may need to be updated.
If the card does not function with the original PC please navigate to the link below to begin the exchange process."

Per their request, I did test the PEX1PCI1 in a Windows pc (Windows 7 64-bit) and it worked as it should of. The Audigy 2 ZS sound card was recognized. Super awesome fun time! Heck it does me no good if it works, but not 100% in the pc I needed it to. Another thing to note is I didn't have space to put my Promise SATA controller card in the Windows pc. I am not sure if that would of effected the results. The StarTech response was not what I was looking for, but did help me come to a conclusion.

Conclusion:

I will go out on a limb and say if your using the PEX1PCI1 for a Windows pc you "should" have no issues. The PEX1PCI1 in a Linux pc "could" or "may" work for you, but depends if the motherboard chipset will play nice. For example, if the motherboard's chipset controlling the PCI/PCIe slots will play nice with the PEX1PCI1 and whatever you have populating the PCI/PCIe slots. The cheapest non-creative labs sound card with SPDIF output which is fully supported in Linux is anywhere from $90+ to $180+. I am in the process of RMAing this back to Amazon for a refund. I hope this review is helpful in some way. I wish the StarTech PEX1PCI1 would of worked for me. $35 for the PEX1PCI1 is a paltry sum compared to replacing a $200 sound card. Hopefully it can work for you for your situation.

StarTech.com PCI Express to PCI Adapter Card (PEX1PCI1) Opinions
Perfect but fragile . I've been using one of these for 6 months now with a low profile digital TV tuner.

While it is a given that this will only hold a low profile card it does it flawlessly. Just plug it into the pci-e slot, plug in the power cord and install your low profile pci card. No drivers, no software, no problems. Perfect.

My reason for not giving 5 stars was I had to return the first one I received because an electronic part (a choke) was broken off, hanging by its wires. But it still worked! I could have glued the choke back on with super glue but decided to return it for a replacement, which arrive intact.

I just purchased another one. I am adding another TV tuner to my second pci-e slot.

Works great in Windows XP and 7 but... . I ordered 2 of these adapters because I wanted to use an old SCSI PCI card and a Sound Blaster Audigy 2ZS in motherboard which has no PCI slots. I was skeptical at first because many interface adapters I've used in the past "partly" work at best. I was pretty worried when I opened the boxes for these adapters and neither had a driver disk.

However, I simply plugged the adapters in with the two PCI cards and the PCI cards were detected and installed flawlessly. It's been alittle over a month since I started using them and I've encountered no problems. I will note that if your PCI cards are not "low profile" You WILL need to cut away part of your case if there are multiple ports on the back of the PCI card. I used tinsnips to do this but a dremel would also work.

Overall for windows XP/7 they work great, but the physical attributes of this adapter are clumsy. Just make sure you have a big enough case for this adapter before order. I didn't measure it exactly but I'd eyeball this adapter at raising the PCI card 1.5 to 2.0 inches away from the motherboard.

this thing ROCKS! . I have a couple of PCI items I can't live without, and as we all know, PCI is nearly gone... this saved me. The computer doesn't even seem to know its there (no drivers) it just sees the PCI card with no issues through the PCIe slot. The chassis has to be a little larger than normal because it makes your PCI card an inch taller. But I've had no problems.

Cons Review

Be Sure It'll Handle Your Situation . The key word in the description is "low profile" but what it means practically is this adapter can only handle PCI cards such as ethernet adapters requiring limited space in certain sized cabinets.

I was unable to fit an Audigy sound card in an HP Pavilion desktop without cutting away chunks of the cabinet that I'm sure would have voided my warranty. On an older machine I might have gotten out the metal snips so, if you're so inclined, perhaps this will work for you.

It's really a shame because, although I'm no hardware engineer, the problem in this case doesn't seem that complicated - attach the PCIe male on a bendable cable or some kind of bracket so as not to force the PCI card so far out of alignment with the cabinet. In the worst case, allow the PCI card to mount completely inside the case and let me run the connectors through the slot opening using a makeshift dust shield.

Even if the end result is using up the space of two PCIe slots to accomodate one PCI card, I'm sure a lot of users would consider it an acceptable interim solution for the price until they eventually shell out more for PCIe cards - which are still not ubiquitous for all applications nor have full Win 7 support.

Fortunately Amazon's return policy is very fair and I can return it.

Feature StarTech.com PCI Express to PCI Adapter Card (PEX1PCI1)

• The unique bracket design allows a low profile/half-height PCI card to work seamlessly in a PCI Express-based expansion slot
• Backed by a StarTech.com 1-year warranty and free lifetime technical support
• Innovative bracket design adapts and secures the existing half-height/low profile bracket of the PCI Card
• PCI Express base spec 1.0a compliant for up to 250MBps of available bandwidth
• LP4 Power Connector Included for Universal Voltage PCI Cards (3.3V/5V)
• Compliant with PCI Express to PCI/PCI-X Bridge spec 1.0
• No driver or software installation

Related Post

• Half mini-PCIe 802.11b/g/n WiFi Module Mini Card with Bluetooth Built In
• Diamond 90590028 HomeFree Phoneline USB External Network Adapter
  (PC/Mac)
• 2-PORT Pci Express X1 Card

Product Details

EAN : 1291840001343
UPC : 065030834629
MPN : PEX1PCI1
Brand : StarTech
Weight : 1 pounds
Height : 2 inches
Length : 9 inches
Width : 6 inches
Binding : Personal Computers
Format : CD-ROM
Hardware Platform : Pc
Manufacturer : Startech
Model : PEX1PCI1
Operating System : Windows
Platform : Windows
Publisher : Startech
SKU : 386997#0
Studio : Startech

Where To Buy

You can buy StarTech.com PCI Express to PCI Adapter Card (PEX1PCI1) on Amazon . Click here to Read More

Rosewill RHUB-310 USB2.0 7-Port Standing Hub with Power Adapter

Price : Too low to display

Features:
Various Colors _ Usually Red
Cable Length: 1 m
Backward Compatible to USB 1.1
Supports self-powered mode & DC Adapter.
Supports Over-current detection and individual power control.
Compatible with Win7

Manufacturer Warranty
Parts 1 year limited
Labor 1 year limited

This review is from : Rosewill RHUB-310 USB2.0 7-Port Standing Hub with Power Adapter
Superlative performance even after a year of 24/7 use . This hub has served me very well for over 8 months now. With its power adapter connected, it is running 24/7, with four external hard drives and a DVD-RW drive (all with their own power adapters), a Bluetooth headset charging when not worn, and a phone charging when not in use, all at once and all without incident. The form factor is lean without being excessively minimalist; USB plugs seat fully and firmly, and there's enough room for those plugs with a little more-than-usual shielding around them. The removable foot for trying to stand the hub upright is silly, unless you're going to glue it to your desk or something. Really, the hub is best laid on its side, as it will just fall over from the weight of the UBS cords attached to it otherwise. However, because the foot is plastic, it is easily drilled through, if you need to bolt or screw a hub to something (e.g. the underside of hutch or shelf), so it could have its uses after all. Throughput appears to be about as fast as connecting drives directly to the computer's built-in ports - I regularly watch HD video from an external disk running through this hub. The power cord is of at least average length, enough to reach from floor to desk with some to spare. I've thrown out a lot of hubs over the years; this one I'm about to order another of, for my laptop.UPDATE: At a full year, this product is still working flawlessly, always-on and generally pumping data constantly through 2 ports with external hard drives attached (my downloads and backup disks), and with at least 5 ports in use at once, during peak hours, often all 7.

Rosewill RHUB-310 USB2.0 7-Port Standing Hub with Power Adapter Reviews
7 port hub . I have tried many small inexpensive USB hubs, and this one has very good quality and has not given me any problems. I'm using 6 of the ports on a full time basis.

Product Image

Feature Rosewill RHUB-310 USB2.0 7-Port Standing Hub with Power Adapter

• Standards USB 2.0/1.1
• Transfer Rate 1.5/12/480Mbps
• Ports 1 x MINI Type-B Upstream, 7 x Type-A Downstream
• Power Input 5V, 2A
• Dimensions 3.7" x 1.8" x 0.6" (without stand) 4.1" x 2.0" x 2.0" (with stand)

Related Post

• PHILIPS 4-Port USB Hub
• Netgear EN106TP 10Base-T Ethernet Hub
• 4PORT USB 2.0 Hub Drive Bay Dark Gray

Product Details

EAN : 0898745015355
UPC : 898745015355
MPN : RHUB-310
Brand : Rosewill
Weight : 1 pounds
Height : 3 inches
Length : 9 inches
Width : 5 inches
Binding : Electronics
Manufacturer : Rosewill
Model : RHUB-310
Publisher : Rosewill
Studio : Rosewill

Where To Buy

You can buy Rosewill RHUB-310 USB2.0 7-Port Standing Hub with Power Adapter on Amazon . Click here to Read More

Westell DSL Modem

Price : Too low to display

Westell Modem . We have this modem and it's never given us a problem, works great.

This review is from : Westell DSL Modem
Works Great . If your phone company has updated the lines from analog then this will work. I used it for five years very happily. But when we moved to central Utah we found that they have not updated the lines for dsl.

Westell DSL Modem Reviews
No Problems With Ours . I see alot of one star reviews so I thought I would write about our experience. We moved over 3 years ago to a new area and had to select a new DSL provider...this is how we got this modem in the first place. We have used it ever since then and it has been great. We leave it on 24/7 and actually use it in conjunction with a linksys router. Maybe about 3 times in these past few years I've had to restart the modem. If the Internet gets sluggish and a computer reboot doesn't help, I would turn off everything (router/modem/computer) and turn it back on and everything would be fine again. That has been only a few times though. Anyway, we've had a great experience with ours. Hope this helps!

Cons Review

Have to agree with Veronica Williams . This DSL modem is a piece of junk. Not exactly sure what the problem with this thing is, but it has to be cold booted (unplug it, wait 15 seconds, plug it in again) every morning if I want to retain the through-put I'm paying for.

If you own one of these things you can see for yourself how bad it is by running a speed test at the DSL Reports website before doing a cold boot and after doing a cold boot. In my case the download speed *DOUBLES* after a reboot.

Not the Modem for me! . I'm visiting my family in TN, and they have DSL. at home, I have cable internet. After suffering many many hours with Linksys and discovering I needed a DSL modem, I assumed this one would do the trick. It may work well for others; but for this Internet savvy person, it did nothing but cost me 30 bucks and extra irritation amongst other things. There was no installation disk, no warning that this modem was for AOL, and no up-to-date-filters to adhere to the Bellsouth high-speed Internet necessities. All in all, this little white Westell Modem is NOT something I'd reccomend. Since I cannot return it, I'm stuck with a product I'll never use. I spent hours stressing over modems and routers on this site and it angers me that I still failed in finding the right product to get online via DSL.

UPDATE:

To the seller--giving me a 2 out of 5 rating for telling the truth about your misleading advertisement is very tacky. I see what kind of business you do, which is why I knew good and well I'd be better off selling it than trying to demand a refund from such a shady writer. Do not EVER plan to buy from you again and I guarantee other people will end up just as unhappy.

This is a piece of Junk!!!! . I have one given by Bellsouth. It drops whenever there is a thunderstorm or rain. Bellsouth (AT&T) is replacing it with the Westell 327W and were quick to do it for free. Tech said it is a problem.

junk is not the word for this. . run from this product. i got this modem when i had verizon dsl and when i switched to dsl extreme. i know.. i know... what do you expect for free. well at the very minimum i expect it to at least work. i makes a better frisbee than a modem.

Related Post

• NOVATEL USB760 3.1 Mbps Wireless cellular modem 3G USB Broadband Device
  for Verizon
• US Robotics V.92 External 56K Faxmodem USR5686E
• Cisco SRW224G4 24-port 10/100 + 4-port Gigabit Switch - WebView

Product Details

Brand : Westell
Binding : Electronics
Manufacturer : Westell
Publisher : Westell
SKU : Generaton 1-72
Studio : Westell

Where To Buy

You can buy Westell DSL Modem on Amazon . Click here to Read More

New 150mbps Wifi USB Wireless LAN Adapter 802.11 B/g/n

Price : Too low to display

This wireless card support all Operation system Chipset (RT3070): Mac, Linux , Windows: 32bit : Windows 2000, XP, Vista, windows 7 Windows: 64bit : Windows xp 64bit, windows vista 64bit, windows 7 64bit USB 802.11N 150M WIRELESS LAN Adapter with Detachable Antenna(RT3070 Chipset) Support 64/128-bit WEP, complies with 128 bit WPA standard(TKIP/AES), Supports MIC, IV Expansion, Shared Key Authentication, IEEE 802.1X supports 150/54/48/36/24/18/12/9/6/11/5.5/2/1 Mbps wireless LAN data transfer rates Quick Secure Setup, complies with WPS for worry free wireless security Simple Configuration and monitoring Supports Roaming technology, guaranteeing efficient wireless connections. With Detachable Antenna Max transmit range: Indoor :100m, Outdoor: 300m Package : 1 x usb wireless adapter,1 x antenna, 1 x CD driver.

This review is from : New 150mbps Wifi USB Wireless LAN Adapter 802.11 B/g/n
Fast inexpensive and easy of use . I was little skeptical when I ordered this USB WIFI adapter. I saw many reviews of other adapters that drop signals. I never heard about its brand. It came in a small box and was wrapped with protective plastic wrapper. A mini CD was also in the box. I inserted it to the USB slot on the back of my PC and attached the antenna to it. After I started my PC, I saw that the wireless icon indicated five bars, a good sign of signal strength. Then, I input the security key and launched my Firefox. Ban, my Yahoo homepage was displayed immediately! It took me about two minutes to see the internet page from installation of the adapter. I did not even bother to install the driver in the CD. My internet connection is definitely faster than my old NETGEAR PCI adapter (WT311). I am very pleased with this adapter.

GREAT . It was perfect! I Bought it for my xbox 360 but it didn't work! So I use it for my desktop Perofect!!!! Torrents download at 10 MB/s!!!!!

Cons Review

worst . at first don't fit well on your usb port
on windows 7 keep disconnecting you from the internet
and you can't connect again so stay away from this product
and save your self a lot headache.

Product Image

Feature New 150mbps Wifi USB Wireless LAN Adapter 802.11 B/g/n

• LAN data transfer rates Quick Secure Setup,
• Complies with WPS for worry free wireless security
• Simple Configuration and monitoring Supports Roaming technology, guaranteeing efficient wireless connections.

Related Post

• SPECTEC SDIO Wireless LAN Card WLAN 802.11b
• Kyocera Alltel Passport KPC650 PC Card PCMCIA EVDO
• Toshiba PA3171U-1MPC TOS Satellite 802.11b Wireless LAN Mini PCI
  Expansion Card

Product Details

EAN : 0797734293678
UPC : 797734293678
Brand : Importer520
Color : white
Binding : Electronics
Manufacturer : none
Publisher : none
SKU : MCE88-TDENG-EUB9603EXT
Studio : none

Where To Buy

You can buy New 150mbps Wifi USB Wireless LAN Adapter 802.11 B/g/n on Amazon . Click here to Read More