Price : Too low to display
Cisco SG300-10 Ethernet Switch - 10 Port - 2 Slot SRW2008-K9-NA 63
This review is from : Cisco SG 300-10 (SRW2008-K9-NA) 10-Port Gigabit Managed Switch
Great layer 3 switch even for a tech home! . I needed to segment out my network into separate collision domains because I have a TON of LAN traffic. You'd be amazed how much junk gets on a advanced home network if you were to truly investigate your LAN traffic. This switch assumes you know CCNA level switch technologies and routing. If you want plug and play, go away from this model and just buy a un-managed switch. Me on the other hand, I want full management, network segmentation, Quality of Service, Access Control Lists, the whole 9 yards. This switch does not use the standard Cisco IOS set of commands so the GUI and menu driven CLI took some getting use to. Provides great network performance, secure collision domains, remote management is wonderful, SNMP features are fabulous and at a great price for the package. Integrates nicely with a Cisco 881 WAN router and really took a load off it's CPU and memory utilization after installing the Cisco SG100-10.
Great layer 3 switch even for a tech home! . I needed to segment out my network into separate collision domains because I have a TON of LAN traffic. You'd be amazed how much junk gets on a advanced home network if you were to truly investigate your LAN traffic. This switch assumes you know CCNA level switch technologies and routing. If you want plug and play, go away from this model and just buy a un-managed switch. Me on the other hand, I want full management, network segmentation, Quality of Service, Access Control Lists, the whole 9 yards. This switch does not use the standard Cisco IOS set of commands so the GUI and menu driven CLI took some getting use to. Provides great network performance, secure collision domains, remote management is wonderful, SNMP features are fabulous and at a great price for the package. Integrates nicely with a Cisco 881 WAN router and really took a load off it's CPU and memory utilization after installing the Cisco SG100-10.
Cisco SG 300-10 (SRW2008-K9-NA) 10-Port Gigabit Managed Switch Reviews
A solid performer just like it's bigger brothers... . Cisco is well known for Enterprise networking, and I was keen to see how well these switches performed against my expectations. I'm a highly technical home user. You won't need a bunch of this functionality at home unless you really know what you're up to, and why you'd want to do it.
The feature set is amazing. You get big brand complex features, right out of the box. You've found a switch that genuinely appears to do everything you could need, from VLANs to Link Aggregation, from MAC and 802.1x filtering, to provider edge port isolation. There's fully configurable Logging, QoS, management, IPv6 and many many more that I'm not personally using. Hmm, I should also mention that the full online HTML help inside the UI is a great addition to people doing config with these devices for the first time.
Management and Configuration is smooth and painless through either the GUI or via the CLI on the recent firmware upgrades. Those familiar with IOS will find things that are familiar in the CLI, as well as frustrations when things aren't quite IOS. Better still, this device has all the same configuration options and features as the larger 24 port and 48 port devices, with slightly scaled limits. That means it can be an integral, fully functional part of the network where you need only a small number of ports, and can even be link-aggregated back to a core, optionally with fiber modules.
This for me was a great "behind the TV" switch, LAG'd to my main Cisco 300-52. That gave me 8 ports of GigE where the builder of my house had only installed two Cat5e drops. The ability to use VLANs keeps all my VoIP traffic from the Polycom voice over ip phones off the rest of the network. I have QoS configured for the game consoles, and even have guest internet access running with the provider edge function (port protection) back to my Sonicwall and out to the Internet.
There is great consistency between the 300 series and the 200 series devices, so in a mixed network, administration should be fairly simple.
Cisco have already put out a couple of firmware upgrades for this device, and unlike the Enterprise class products, you don't need a support contract to download them. Simply register a CCO account, and the small business site will let you download the upgrades for free.
This switch has generally been very stable, with no need to reboot for months of runtime.
I have seven variants of this device in my network. No issues with any of them. A solid purchase. I'm using several VLANs, most of the QoS features and a lot of the security features. My home network supports both a corporate network over a VPN link and my home devices, as well as a guest WiFi Hotspot for frequent visitors. Couldn't have made it all work without these switches and the Cisco 1142 AP's.
Happy Networking !
A solid performer just like it's bigger brothers... . Cisco is well known for Enterprise networking, and I was keen to see how well these switches performed against my expectations. I'm a highly technical home user. You won't need a bunch of this functionality at home unless you really know what you're up to, and why you'd want to do it.
The feature set is amazing. You get big brand complex features, right out of the box. You've found a switch that genuinely appears to do everything you could need, from VLANs to Link Aggregation, from MAC and 802.1x filtering, to provider edge port isolation. There's fully configurable Logging, QoS, management, IPv6 and many many more that I'm not personally using. Hmm, I should also mention that the full online HTML help inside the UI is a great addition to people doing config with these devices for the first time.
Management and Configuration is smooth and painless through either the GUI or via the CLI on the recent firmware upgrades. Those familiar with IOS will find things that are familiar in the CLI, as well as frustrations when things aren't quite IOS. Better still, this device has all the same configuration options and features as the larger 24 port and 48 port devices, with slightly scaled limits. That means it can be an integral, fully functional part of the network where you need only a small number of ports, and can even be link-aggregated back to a core, optionally with fiber modules.
This for me was a great "behind the TV" switch, LAG'd to my main Cisco 300-52. That gave me 8 ports of GigE where the builder of my house had only installed two Cat5e drops. The ability to use VLANs keeps all my VoIP traffic from the Polycom voice over ip phones off the rest of the network. I have QoS configured for the game consoles, and even have guest internet access running with the provider edge function (port protection) back to my Sonicwall and out to the Internet.
There is great consistency between the 300 series and the 200 series devices, so in a mixed network, administration should be fairly simple.
Cisco have already put out a couple of firmware upgrades for this device, and unlike the Enterprise class products, you don't need a support contract to download them. Simply register a CCO account, and the small business site will let you download the upgrades for free.
This switch has generally been very stable, with no need to reboot for months of runtime.
I have seven variants of this device in my network. No issues with any of them. A solid purchase. I'm using several VLANs, most of the QoS features and a lot of the security features. My home network supports both a corporate network over a VPN link and my home devices, as well as a guest WiFi Hotspot for frequent visitors. Couldn't have made it all work without these switches and the Cisco 1142 AP's.
Happy Networking !
Cisco SG 300-10 (SRW2008-K9-NA) 10-Port Gigabit Managed Switch Opinions
Works well -- Is "managed" needed or useful? . Still learning IF I really need a "managed" switch for our Ethernet based product... have been using unmanaged switches that work fine, so.. are the default settings going to work as well as an un-managed switch? How will I know?
Works well -- Is "managed" needed or useful? . Still learning IF I really need a "managed" switch for our Ethernet based product... have been using unmanaged switches that work fine, so.. are the default settings going to work as well as an un-managed switch? How will I know?
Related Post
- TopLink 5-Port Gigabit Ethernet Desktop Switch - 10/100/1000 Mbps
- SMC Networks SMCFS8 10/100Mbps Unmanaged 8-Port Compact Switches
- TRENDnet USB/VGA KVM Cable, 15ft. (Male to Male) TK-CU15
Product Details
EAN : 0882658295645UPC : 882658295645
MPN : SRW2008-K9-NA
Brand : Cisco
Weight : 5 pounds
Height : 3 inches
Length : 15 inches
Width : 12 inches
Binding : Personal Computers
Department : Network Switches
Manufacturer : CISCO SYSTEMS - ENTERPRISE
Model : SG 300-10
Publisher : CISCO SYSTEMS - ENTERPRISE
Size : 10-Port
SKU : SRW2008K9NA
Studio : CISCO SYSTEMS - ENTERPRISE
Where To Buy
You can buy Cisco SG 300-10 (SRW2008-K9-NA) 10-Port Gigabit Managed Switch on Amazon . Click here to Read More
