Price : Too low to display
Wireless G Desktop Adapter
This review is from : D-Link WDA-1320 Wireless G Desktop Adapter
It works with Suse 10 without hassle . I bought this wireless card to replace the Linksys WMP54G v4.1 which I could never make it to work with Suse 10. To my total surprise, this D-Link WDA-1320 works with Suse 10 without any hassle - no need to use Ndiswrapper and 3rd party driver. The card was correctly detected by the system after the machine was booted up in Linux mode (it's a dual boot machine). I configured the card using Suse's YaST2 tool and that's it. This card doesn't have a great range. It comes with a tiny antenna, and even after I replaced the antenna with the bigger antenna from the old Linksys card, the signal stength is still kind of weak. There were also some minor problems during driver installation as usual. But I can't complain as it works just fine and it works with Suse 10 out of the box, thank goodness!
By the way, the card I got has the Hardware Version A1 and Firmware Version 1.0
It works with Suse 10 without hassle . I bought this wireless card to replace the Linksys WMP54G v4.1 which I could never make it to work with Suse 10. To my total surprise, this D-Link WDA-1320 works with Suse 10 without any hassle - no need to use Ndiswrapper and 3rd party driver. The card was correctly detected by the system after the machine was booted up in Linux mode (it's a dual boot machine). I configured the card using Suse's YaST2 tool and that's it. This card doesn't have a great range. It comes with a tiny antenna, and even after I replaced the antenna with the bigger antenna from the old Linksys card, the signal stength is still kind of weak. There were also some minor problems during driver installation as usual. But I can't complain as it works just fine and it works with Suse 10 out of the box, thank goodness!
By the way, the card I got has the Hardware Version A1 and Firmware Version 1.0
D-Link WDA-1320 Wireless G Desktop Adapter Reviews
Works fine with Vista Home Premium 64-bit operating system . This adapter is Vista Compatible and its box bears the logo that states this very clearly. Not all such products have the logo, and experience is teaching me that you definitely want the logo that proves certification beyond a doubt.
Installation is a breeze... just insert the card into an empty PCI slot in the motherboard, close up the computer, and then screw the antenna onto the little gold-plated stub that sticks out the back of the case. Follow the easy-to-follow instructions that are provided, use the driver disk, and you'll be connected to your wireless router. You really can't go wrong. I'm getting 100% signal strength, but that's unremarkable because the computer and the wireless router are in the same room.
One thing happened that I still don't understand -- after installation and re-boot, I kept getting messages that the "ANIWZCS2 launcher" for Windows wouldn't do whatever it is that it thinks it needs to do. I googled this up and most comments I saw said to simply disable this ANIWZCS2 thing in the Startup of MSCONFIG. Or, you can download something from Intel called ICH9 INFINST_AUTOL and then run it. I downloaded it, but didn't execute it. This ANIWZCS2 launcher is evidently not something the D-Link wireless card needs on my Vista 64-bit system because I'm going to internet sites just fine with no problem. By unchecking the item in Startup in MSCONFIG, I don't get the nag message anymore. Still, it's irritating things like this come up at all, especially after a product and its software is fully designated as "Vista Compatible". It may not be D-Link's fault -- who knows? Anyway, that's why I gave it four stars instead of five....
Works fine with Vista Home Premium 64-bit operating system . This adapter is Vista Compatible and its box bears the logo that states this very clearly. Not all such products have the logo, and experience is teaching me that you definitely want the logo that proves certification beyond a doubt.
Installation is a breeze... just insert the card into an empty PCI slot in the motherboard, close up the computer, and then screw the antenna onto the little gold-plated stub that sticks out the back of the case. Follow the easy-to-follow instructions that are provided, use the driver disk, and you'll be connected to your wireless router. You really can't go wrong. I'm getting 100% signal strength, but that's unremarkable because the computer and the wireless router are in the same room.
One thing happened that I still don't understand -- after installation and re-boot, I kept getting messages that the "ANIWZCS2 launcher" for Windows wouldn't do whatever it is that it thinks it needs to do. I googled this up and most comments I saw said to simply disable this ANIWZCS2 thing in the Startup of MSCONFIG. Or, you can download something from Intel called ICH9 INFINST_AUTOL and then run it. I downloaded it, but didn't execute it. This ANIWZCS2 launcher is evidently not something the D-Link wireless card needs on my Vista 64-bit system because I'm going to internet sites just fine with no problem. By unchecking the item in Startup in MSCONFIG, I don't get the nag message anymore. Still, it's irritating things like this come up at all, especially after a product and its software is fully designated as "Vista Compatible". It may not be D-Link's fault -- who knows? Anyway, that's why I gave it four stars instead of five....
D-Link WDA-1320 Wireless G Desktop Adapter Opinions
Does exactly what it claims . I bought this card after having tried other brands to replace a malfunctioning linksys Wireless-G card.
With WindowsXP SP2 I simply installed the card and on boot-up told XP to look on the CD for the drivers. Hey presto, installed. Used the Windows Wireless manager to set up my WPA-PSK connection and off we went. Solid connection and my wife is now happy again because her internet connection is no longer flaky.
Perfect install, flawless execution, good value, and great product that delivers.
Does exactly what it claims . I bought this card after having tried other brands to replace a malfunctioning linksys Wireless-G card.
With WindowsXP SP2 I simply installed the card and on boot-up told XP to look on the CD for the drivers. Hey presto, installed. Used the Windows Wireless manager to set up my WPA-PSK connection and off we went. Solid connection and my wife is now happy again because her internet connection is no longer flaky.
Perfect install, flawless execution, good value, and great product that delivers.
WDA-1320 Wireless G desktop adapter . The D-link WDA-1320 adapter works well for me. It was easy to install and setup. The signal strength is excellent in my case since the distance between the router and adapter is not that great. I suspect it could be a problem in large homes with multiple rooms between the router and the adapter.
Works Great with Windows XP and Ubuntu Linux . I purchased this wireless network card to replace a flakey Linksys WMP54G Wireless-G PCI Adapter that was used constantly for almost 6 years (card has recently become unreliable).
From experience with other computers using this card with Ubuntu Linux since 2006, I knew that this wireless card is recognized by Ubuntu Linux and "works out of the box" without using any special drivers or other tricks like using ndiswrapper with Windows XP drivers. I've been using two of these wireless cards since 2006 and a third one of these cards since 2007. All have proven themselves reliable and Linux-compatible.
To save money on my most recent purchase, I purchased a refurbished card ($12.95, free shipping) and received it from the Amazon retailer (Digitalet) in 5 days.
For using with Windows XP, I downloaded the latest drivers from the D-Link web site.
For dual boot with Ubuntu Linux, I didn't need to download anything (the card was automatically recognized and no special drivers were required).
From experience with other computers using this card with Ubuntu Linux since 2006, I knew that this wireless card is recognized by Ubuntu Linux and "works out of the box" without using any special drivers or other tricks like using ndiswrapper with Windows XP drivers. I've been using two of these wireless cards since 2006 and a third one of these cards since 2007. All have proven themselves reliable and Linux-compatible.
To save money on my most recent purchase, I purchased a refurbished card ($12.95, free shipping) and received it from the Amazon retailer (Digitalet) in 5 days.
For using with Windows XP, I downloaded the latest drivers from the D-Link web site.
For dual boot with Ubuntu Linux, I didn't need to download anything (the card was automatically recognized and no special drivers were required).
Works well; instructions for WEP access could be much better. . Easy to install in the computer; not so easy to connect if you've got WEP security enabled on your router.
First off, the instruction manual says to install the adapter BEFORE loading the drivers onto the computer from the included CD. But, the "quick installation guide" says the opposite - install the drivers first! Generally I install drivers before hardware, and I did that this time and it worked just fine.
The trouble was with making it talk to my router and enabling WEP encryption. The instructions are very vague and incomplete about this. Also the install utility was worthless, unless you're connecting with other forms of security (or none at all.)
Fortunately I have another wireless computer with a Netgear adapter in my house, and I was able to look at those settings and make adjustments to the computer with the D-Link adapter. (Both computers have XP; the trick for me was turning off the "let Windows configure my network" option.)
To be fair, Netgear's instructions are no better; actually probably worse.
So, 5 stars for the product working as expected, 3 for so-so instructions, 4 stars average.
First off, the instruction manual says to install the adapter BEFORE loading the drivers onto the computer from the included CD. But, the "quick installation guide" says the opposite - install the drivers first! Generally I install drivers before hardware, and I did that this time and it worked just fine.
The trouble was with making it talk to my router and enabling WEP encryption. The instructions are very vague and incomplete about this. Also the install utility was worthless, unless you're connecting with other forms of security (or none at all.)
Fortunately I have another wireless computer with a Netgear adapter in my house, and I was able to look at those settings and make adjustments to the computer with the D-Link adapter. (Both computers have XP; the trick for me was turning off the "let Windows configure my network" option.)
To be fair, Netgear's instructions are no better; actually probably worse.
So, 5 stars for the product working as expected, 3 for so-so instructions, 4 stars average.
Works in Ubuntu - Atheros Chip . This card works in Ubuntu 7.04 - card was automatically detected and I was online in no time.
Haven't tried Windows yet - I'll post once I've used.
One thing I was curious was that the signal strength ranges around 28 - 33% even though my router is only 15 feet away. I'm afraid to increase the distance but as of now, no discernable speed loss.
Haven't tried Windows yet - I'll post once I've used.
One thing I was curious was that the signal strength ranges around 28 - 33% even though my router is only 15 feet away. I'm afraid to increase the distance but as of now, no discernable speed loss.
Clearly made to work with Windows. I have XP. . Setup was a breeze on my XP system. Setup CD was not needed. Device card was immediately recognized and went into service. The network was previously set up.
I gave the device only 4 stars for reliability because signal strength from a cable-connected wireless router only 100 feet away fluctuates through the day, between good and very weak, and I don't know the cause. I suspect my cable company (Comcast) for delivering a poor connection; their customer service stinks, so I'll live with it.
I gave the device only 4 stars for reliability because signal strength from a cable-connected wireless router only 100 feet away fluctuates through the day, between good and very weak, and I don't know the cause. I suspect my cable company (Comcast) for delivering a poor connection; their customer service stinks, so I'll live with it.
Great Product . Upgraded from an old Linksys WRT54G. I was having problems with streaming video from Netflix and other sites being poor quality, despite having upgraded CPU/Graphics Card. Figured I'd try the D-Link card and the problems were all fixed. It also worked with Windows 7 Beta 1, my other reason for making the switch. Installation was quick and simple on both XP and Windows 7.
Works great in Windows XP and Linux . This adapter was easy to install in my computer, and I was happy to see that not only was it detected and easily installed in Windows XP, but the Feisty Fawn release of Ubuntu as well. The only problem some people may have is that the installation instructions are not very detailed, but anyone who knows anything about PC hardware shouldn't have a problem with it.
Product Image
Feature D-Link WDA-1320 Wireless G Desktop Adapter
- Easily Connect to Your Wireless Network from Your Desktop PC
- Works with 802.11g and 802.11b Wireless Networks
- Check E-mail, Surf the Web, and Chat with Friends and Family Online
Related Post
- Wireless USB2.0 WiFi High-Gain 23dBm 802.11g Adapter
- U.S. Robotics USR5410 Wireless Turbo PC Card
- D-Link DWA-642 RangeBooster N Notebook Adapter
Product Details
EAN : 0790069288524UPC : 790069288524
MPN : WDA-1320
Brand : D-Link
Weight : 1 pounds
Height : 2 inches
Length : 10 inches
Width : 7 inches
Binding : Personal Computers
Format : CD
Manufacturer : D-Link
Model : WDA-1320
Operating System : N/A
Platform : Windows 2000
Publisher : D-Link
SKU : 017736
Studio : D-Link
Where To Buy
You can buy D-Link WDA-1320 Wireless G Desktop Adapter on Amazon . Click here to Read More
