Price : Too low to display
The SATDOCK4U3E eSATA and USB 3.0 4-Bay SATA Hard Drive Docking Station is a convenient, time-saving storage solution for 2.5-inch and 3.5-inch SATA hard drives (HDD) and solid state drives (SSD) allowing for up to 4 SATA drives to be conveniently and quickly connected to a host computer through a single connection. The hard drive docking station features SuperSpeed USB 3.0 connectivity (also compatible with USB 2.0) with support for data transfer rates up to 5Gbps (10x faster than USB 2.0) or eSATA with Port Multiplier connectivity (up to 3Gbps), to provide fast connectivity to all 4 hard drives simultaneously. The eSATA/USB 3.0 SATA hard drive docking station also features dual built-in, variable-speed 60mm fans that can be manually adjusted to keep each drive running cool, depending on the drives and operating environment, or turned off completely. Double the value of this hard drive docking station, using a SATA to IDE hard drive adapter (SAT2IDEADP), which enables you to use any 2.5 or 3.5in IDE hard drive in a SATA hard drive dock slot.
This review is from : StarTech.com SATDOCK4U3E 4 Bay eSATA USB 3.0 to SATA Hard Drive Docking Station for 2.5/3.5 HDD
Excellent product . I saw several complaints about this device before I purchased it, but I decided to go for it anyway. It turned out to be a very good choice. I was continually swapping multiple 500GB to 2TB hard drives in a single dock. This device lets me to put my 4 most frequently used drives into a single unit allowing immediate access to the data therein. I didn't believe the problems reported by others that it requires restarting of all drives (or the computer) after swapping a single drive in the unit and I have not encountered any problems whatsoever when swapping drives in this docking station. As long as you remember to offline the drive before powering it down & replacing it, it works exactly as it should. But then again, I am also using a StarTech dual-port eSATA controller that I bought with this unit as well, so that may be making a difference, too. Since I still need to swap drives and my second eSATA port is only hosting a single-bay toaster, I will probably be getting another one of these to allow still fewer swaps.
Excellent product . I saw several complaints about this device before I purchased it, but I decided to go for it anyway. It turned out to be a very good choice. I was continually swapping multiple 500GB to 2TB hard drives in a single dock. This device lets me to put my 4 most frequently used drives into a single unit allowing immediate access to the data therein. I didn't believe the problems reported by others that it requires restarting of all drives (or the computer) after swapping a single drive in the unit and I have not encountered any problems whatsoever when swapping drives in this docking station. As long as you remember to offline the drive before powering it down & replacing it, it works exactly as it should. But then again, I am also using a StarTech dual-port eSATA controller that I bought with this unit as well, so that may be making a difference, too. Since I still need to swap drives and my second eSATA port is only hosting a single-bay toaster, I will probably be getting another one of these to allow still fewer swaps.
StarTech.com SATDOCK4U3E 4 Bay eSATA USB 3.0 to SATA Hard Drive Docking Station for 2.5/3.5 HDD Reviews
Great device my was poorly built . The specification are perfectly accurate. The two internal fans on mine rattled badly to the point it was too loud and annoying to leave it running full-time. The manual says it discounts with dismounting and mounting drives. I did not experience any of that on either the eSATA or the USB 3.0.
Great device my was poorly built . The specification are perfectly accurate. The two internal fans on mine rattled badly to the point it was too loud and annoying to leave it running full-time. The manual says it discounts with dismounting and mounting drives. I did not experience any of that on either the eSATA or the USB 3.0.
Cons Review
USB 3.0 Screams . Updated 4/21/2011 -1 star: These things have major problems and need to go back into the oven for a few months to get them sorted out. Getting these things to connect requires turning off one of the four drives, waiting a few seconds then turning it back on. Anytime your computer is restarted or goes to sleep, you get to do it again.
Also, if you're trying to move something to another drive and also want to do something else while the move operation is taking place, the second command will freeze. To put this in practical terms, you can't listen to an mp3 and move a file at the same time without the mp3 skipping. Given how fast this interface is, i can not comprehend how this happens.
Updated 3/14/2011 -2 stars: Well the honeymoon has started to wear off a little. Here's the deal: The firmware is clearly immature. The drives don't seem to be able to operate independently of each other within the bay. For instance, if you turn any one of the four drives off, then the entire array resets and all the drives disconnect and reconnect with windows instead of just one.
The disconnect/reconnect process wouldn't be so bad except that the drives don't reconnect well at all, and instead keep trying to connect over and over and each time they do, you can hear the clicking as the drives start/stop, start/stop. Sometimes the drives will never reconnect and you'll have to turn them each off and back on manually, in order to restart the connect process--which will hopefully work this time.
This kind of start/stop stress is disastrous for hard drives as the continuous on and off process will shorten the drives life considerably. I can't think of a worse flaw for a drive bay to have.
Finally, if you happen to restart windows or turn off your computer on a regular basis, do not get one of these because doing so just starts the continuous on/off process again which may continue indefinitely until you intervene (at which point the mechanical parts of the drive might already be dead from over stress.)
Recommendation: Until they improve the firmware and fix the windows connectivity issues, i'd stay away.
Original review continues below.
Pros:
Extremely fast transfer speeds.
Holds four drives and only uses one usb 3.0 connection.
Cons:
The fans don't seem to do much, if anything. I can't even tell if they're on or not.
The drives won't seem to turn off so they are always running and always hot regardless of your windows power settings. I'm assuming this is a USB 3.0 thing and not the drive bay itself, so hopefully this will be fixed with a windows update.
I have 8 external 7200rpm hard drives all using USB 2.0 and the transfer speeds when moving files from one drive to another averaged a meager 15 - 30MBs. After plugging four of them into this USB docking bay, the transfer speeds increased to 45 - 85MBs (using usb 3.0). (Note these are video files i'm talking about here)
After five minutes of playing around with this thing, and seeing the massive increase in transfer speed, i got on amazon and ordered another one overnight delivery for my other four drives.
Cannot recommend this enough if you have some vacant USB 3.0 ports. USB 3.0 is the next level. Once you use it, you'll never want to go back.
Also, if you're trying to move something to another drive and also want to do something else while the move operation is taking place, the second command will freeze. To put this in practical terms, you can't listen to an mp3 and move a file at the same time without the mp3 skipping. Given how fast this interface is, i can not comprehend how this happens.
Updated 3/14/2011 -2 stars: Well the honeymoon has started to wear off a little. Here's the deal: The firmware is clearly immature. The drives don't seem to be able to operate independently of each other within the bay. For instance, if you turn any one of the four drives off, then the entire array resets and all the drives disconnect and reconnect with windows instead of just one.
The disconnect/reconnect process wouldn't be so bad except that the drives don't reconnect well at all, and instead keep trying to connect over and over and each time they do, you can hear the clicking as the drives start/stop, start/stop. Sometimes the drives will never reconnect and you'll have to turn them each off and back on manually, in order to restart the connect process--which will hopefully work this time.
This kind of start/stop stress is disastrous for hard drives as the continuous on and off process will shorten the drives life considerably. I can't think of a worse flaw for a drive bay to have.
Finally, if you happen to restart windows or turn off your computer on a regular basis, do not get one of these because doing so just starts the continuous on/off process again which may continue indefinitely until you intervene (at which point the mechanical parts of the drive might already be dead from over stress.)
Recommendation: Until they improve the firmware and fix the windows connectivity issues, i'd stay away.
Original review continues below.
Pros:
Extremely fast transfer speeds.
Holds four drives and only uses one usb 3.0 connection.
Cons:
The fans don't seem to do much, if anything. I can't even tell if they're on or not.
The drives won't seem to turn off so they are always running and always hot regardless of your windows power settings. I'm assuming this is a USB 3.0 thing and not the drive bay itself, so hopefully this will be fixed with a windows update.
I have 8 external 7200rpm hard drives all using USB 2.0 and the transfer speeds when moving files from one drive to another averaged a meager 15 - 30MBs. After plugging four of them into this USB docking bay, the transfer speeds increased to 45 - 85MBs (using usb 3.0). (Note these are video files i'm talking about here)
After five minutes of playing around with this thing, and seeing the massive increase in transfer speed, i got on amazon and ordered another one overnight delivery for my other four drives.
Cannot recommend this enough if you have some vacant USB 3.0 ports. USB 3.0 is the next level. Once you use it, you'll never want to go back.
Mounted Drive(s) disconnect(s) "constantly" . I had to RMA it. The mounted HDs appeared/disappeared in Windows after a couple of minutes. I tried different USB 3.0 adapters, different drives, only one drive - in different slots, USB 2.0, contacted support, etc. Finally, I gave up and RMAed it. Wait a couple of months until STARTECH figured it out.
Feature StarTech.com SATDOCK4U3E 4 Bay eSATA USB 3.0 to SATA Hard Drive Docking Station for 2.5/3.5 HDD
- Access up to 4 SATA drives simultaneously over a single USB 2.0/3.0 or eSATA connection
- Dual, variable speed fans allows you to adjust the amount of cooling for any kind of environment or drives
- Independent power buttons and eject mechanism for each SATA hard drive allows for quick and easy hot-swapping
- Accepts up to 4 SATA hard drives simultaneously, in a single docking station
- Dual 60mm cooling fans mounted below the drives with variable speed controls (including OFF)
- Backward compatible with USB 2.0 systems, out of the box
- SuperSpeed USB 3.0 compliant host interface with support for transfer rates up to 5 Gbps
- Supports both 2.5" and 3.5" form factor hard drives (HDD) and solid state drives (SSD)
Related Post
- Cisco SR224T 24 port 10/100 Switch
- StarTech.com 2 Port SuperSpeed USB 3.0 PCI Express Card with SATA Power
(PEXUSB3S22) - Frisby Self Powered 4-port USB 2.0 HUB for Computer Notebook PC Mac
Product Details
EAN : 0065030842488UPC : 065030842488
MPN : SATDOCK4U3E
Brand : StarTech
Color : Black
Weight : 5 pounds
Height : 7 inches
Length : 14 inches
Width : 9 inches
Binding : Personal Computers
Manufacturer : STARTECH.COM
Model : SATDOCK4U3E
Publisher : STARTECH.COM
SKU : 065030842488
Studio : STARTECH.COM
Where To Buy
You can buy StarTech.com SATDOCK4U3E 4 Bay eSATA USB 3.0 to SATA Hard Drive Docking Station for 2.5/3.5 HDD on Amazon . Click here to Read More
